3Jtech G2Wifi II Handbuch zur Schnellinstallation - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Drahtloser Router 3Jtech G2Wifi II herunter. 3Jtech G2Wifi II 8 Seiten.

Ver 1.0.0.0

Once the device has rebooted properly, you can check if the switch is online by

clicking on the STATUS. The information should be displayed under the WAN section.

Restore Factory Default Settings

G2wifi II provides a "Reset" button that will be easy for users to reset the router to default. The

button is located at the rear panel of the router (See the figure below). Reset steps are as

follows:

(1) Unplug the power cable.

(2) Press the RESET button and keep it pressed.

(3) Plug in the power cable and release the RESET button after

10 seconds around.

(4) Procedures of the reset will be completed while all LEDs on

the front panel return into the normal status.

RESET Button