djpower H-SW3000 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Nebelmaschine djpower H-SW3000 herunter. djpower H-SW3000 16 Seiten. Aqua low fog machine

djpower H-SW3000 Benutzerhandbuch
H-SW3000 USER MANUAL V1
5

OPERATION

5.1

Preparing for Operation

After checking that all the parts are intact and complete, position the machine on flat.
Fill the water into water tank when power off. The capacity of water tank is 34 L.
Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage.
Turn on the machine, it will immediately start heating up.
5.2

On-device Control Panel

To access the control panel functions, use the four buttons located underneath the LCD display.
Button
<MENU>
<TIMER>
<VOLUME>
<STOP>
5.3
On-device Control Mode & Operation
5.3.1

Programming

Refer to the Menu Map to understand the menu options. The menu map shows the main level and a variable number of programming
levels for each option.
To go to the desired main level, press <MENU> repeatedly until the option shows on the display. This will take you to the first
programming level for that option.
To select an option or value within the current programming level, press <TIMER>
display. If there is another programming level, you will see that first option, or you will see the selected value.
Press <MENU> repeatedly to switch menu pages.
Press <STOP>
to go back to Standby Page.
5.3.2

Menu Map

Starting Pages
Function
Switch menu pages to select a function
Increases the numeric value of current function
TIMER starts the timer-controlled operation
Decreases the numeric value of current function
VOLUME triggers the pump to modify the output volume
Enter enables the currently displayed menu or sets the currently selected value into the
selected function
STOP turns the fog output off
Display
H-SW3000
Version 1.0
or <VOLUME>
Description
until the option shows on the
Parameter Range
< 7 >