Custom Crimp SM 300 Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Elektrowerkzeug Custom Crimp SM 300 herunter. Custom Crimp SM 300 19 Seiten. Hose skiver

HOW TO LOAD THE ID TOOLING

1. Lift the safety guard out of the way.

2. Select the proper ID tool.

3. Push the PTO quick coupling (as shown) back, align grooves

on ID tool and insert until PTO snaps into place.

4. Put safety guard back into position.

HOW TO REMOVE THE ID TOOLING

1. Lift the safety guard out of the way.

2. Slide the PTO quick coupling back to release it.

3. Place the ID tool back into holder.

HOW TO ADJUST THE ID TOOLING SKIVE LENGTH

1. Verify the skive depth in the hose and ﬁ tting manufacturer's

literature.

2. Loosen the depth collar screw (as shown in picture).

3. Lock the calipers to the desired ID skive length.

4. Place the calipers (as shown) to hit the front edge of skiving

insert and the depth collar at the same time.

5. Tighten the depth collar screw.

6. Skive hose and verity that the depth matches the hose and

ﬁ tting manufacturer's speciﬁ cations.

Skive length