djV DF-V9C Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Nebelmaschine djV DF-V9C herunter. djV DF-V9C 12 Seiten.
Seite druckenFog machine DF-V9C Art.No
V9C Art.No.: 105693
4. Start-up
Attention!
Remove before start-up every packing material.
1. Fill the tank with fluid. Make sure that there is always enough fluid in the
Fill the tank with fluid. Make sure that there is always enough fluid in the
Fill the tank with fluid. Make sure that there is always enough fluid in the
tank.
2. Connect the device to the power supply.
Connect the device to the power supply.
3. The device starts to heat up.
The device starts to heat up. This process needs 4,5 min, while the LED
on the receiver lights red.
on the receiver lights red.
4. The heating process is finished. The LED on the remote or the
The heating process is finished. The LED on the remote or the receiver
The heating process is finished. The LED on the remote or the
lights green.
4.1. Operation
The operation can be made by the wired or the wireless remote.
The operation can be made by the wired or the wireless remote.
The operation can be made by the wired or the wireless remote.
4.1.1. Wired Remote
Wired Remote
Connect the wired remote with the
Connect the wired remote with the device by using the INPUT "Manual
Controller".
1. LED
2. Fog button
up every packing material.
This LED lights green if the device is heated up
This LED lights green if the device is heated up
and ready to use.
This button activates the fog output.
This button activates the fog output.
8 / 12
min, while the LED
INPUT "Manual