Custom Dynamics Dynamic Strips CD-DS-ST-CC Installationsanleitung Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Zubehör für Motorräder Custom Dynamics Dynamic Strips CD-DS-ST-CC herunter. Custom Dynamics Dynamic Strips CD-DS-ST-CC 7 Seiten.
Use the wiring diagram for connecting the Dynamic Strips™ wires to
16
the ST-HARNESS. You can wrap the red connectors with electrical
tape or they may be covered with heat shrink tubing, though neither is
mandatory.
Left Turn Harness =Yellow
Left Turn Harness Ground =Black
Left Run Power =White
Left Run Harness Ground =Black
Right Turn Harness =Yellow
Right Turn Harness Ground =Black
Right
Left
Turn
Turn
ST-HARNESS
Male Connector
To Factory Harness Connector
Questions? Call us at: 1 (800) 382-1388
Installation Instructions - Page 6
Note: The secondary connector on
the ST-Harness is a pass-through
for the wiring if needed. It is typically
not used in this application.
Purple = Left Turn (Yellow LEDs)
Black = Left Turn Ground
White = Left Running (white LEDs)
Black = Left Running Ground
Right Run Power=White
Left Run Ground =Black
Brown = Right Turn (Yellow LEDs)
Black = Right Turn Ground
White = Right Running (white LEDs)
Black = Right Running Ground
Posi-Lock™ Connectors
M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Left
Right
09-2017