Custom Dynamics ProBEAM PB-SCOUT-RR-BR Einbauanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Einbauanleitung für Zubehör für Motorräder Custom Dynamics ProBEAM PB-SCOUT-RR-BR herunter. Custom Dynamics ProBEAM PB-SCOUT-RR-BR 2 Seiten. Scout rear turn signal
Seite druckenInstallation Continued:
3. Disconnect the Left and Right rear turn signal har-
nesses.
4. Remove the left and Right rear turn signal mounting
bolt and remove the turn signal housings from the
bike. Refer to Photo 2.
2
5. Install the new ProBEAM turn signals using the OEM
bolt removed in Step 4.
6. Connect the 2 pin connecter from each turn signal
housing to bike's associated left or right rear turn
signal connecter.
7. Locate the black 2 pin license plate light connector.
See photo 3.
3
8. Connect the black 2 pin connecters from each rear
turn signal in line with the license plate connector.
See Photo 4.
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Installation Instructions - Page 2
9. Using the provided wire ties, secure the wiring harnesses to
prevent them from becoming frayed or damaged by the rear
tire under the fender. Refer to Photo 1.
10. Reconnect the negative battery cable to the battery and install
the seat.
11. Test all lighting for proper operations before riding
4
License Plate
Light Male
Connector
Left
Running
Light
License Plate
Light Female
Connector
Right
Running
Light
04-2020