Custom Dynamics Magic Zone Installationsanleitung Handbuch

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Fernsteuerung Custom Dynamics Magic Zone herunter. Custom Dynamics Magic Zone 7 Seiten. Bluetooth command remote

Seite drucken

Everything to Light Up Your Ride®

Part Number: MAGICZONE-BT

Package Contents:

- Bluetooth Remote Module with inline fuse (1)

- Remote Key Fob (2)

Optional (Sold Separately):

CG01 Cage Clamps (4) for wire connection (included w/ CD lighting kits)

Winter Kill Switch (1) to kill power to remote during storage

The Magic™ Zone Command Remote has 6 wires that connect to the

battery and to the LED wiring. Please see the Diagram on page 2 to

correctly wire the remote module with your choice of LED lighting.

Installation Tips

Follow the wiring instructions on page 2 for wiring the LED's to

the harness. Note: there are 2 red wires, the wire with the Fuse

goes to the battery.

Disconnect the Negative [ - ] battery cable from the battery

before beginning wiring to avoid electrical shorts.

Pick a location to run all of the wires from the LED's and make

your connections. The most common location is under the seat

so to have easy access to the battery. Install the Magic™

Zone Command Remote in this area, paying attention so that

the module will not get crushed or in direct contact with water

and the wires will not get pinched, cut or frayed when the seat

is reinstalled.

Decide which LED's will be on which zone, then group the

wires by zone 1, 2 and 3.

The output wire for any unused zone should be capped off to

prevent shorting.

For a clean, reliable install, use terminal blocks or Cage

Clamps® to group your wires.

Test function of the remote before riding.

If system will not turn on, check the inline fuse on the red wire,

then check the connections to the battery.

If system will not turn on, verify that the Red light on the key fob

is coming on. If it is not, or Red light is dim or is flickering, bat-

teries are weak. Replace with fresh batteries and try again.

Questions? Call us at: 1 (800) 382-1388

Magic™ Zone Bluetooth Command Remote

Installation Instructions

We thank you for purchasing the Custom Dynamics® Magic™ Zone

Command Remote. Our products utilize the latest technology and

high quality components to ensure you the most reliable service.

We offer one of the best warranty programs in the industry and we

back our products with excellent customer support, if you have

questions before or during installation of this product please call

Custom Dynamics® at 1(800) 382-1388.

Caution: Before beginning installation, disconnect the negative

battery cable from the battery to prevent damage to the LEDs or

remote during installation. Damage to either as a result of direct

shorting is not covered under warranty.

Important: This unit is rated for a 7.5 amp load. Never use a fuse

greater than 7.5 amps in the in-line fuse holder, using a larger fuse

or bypassing the fuse will void warranty.

Note: This guide assumes user has properly installed the LED light-

ing products that are to be used in conjunction with this Remote.

Custom Dynamics is not responsible for procedures and instruc-

tions for installing LED products from other manufacturers.

Note: Zone Command Module™ App is Compatible with iPhone 4S

and newer equipped with Bluetooth 4.0 and with Android phones

versions 4.3 and newer with Bluetooth 4.0. Zone Command Mod-

ule™ apps are available for download from the following sources:

- Google Play: https://play.google.com/store/apps

- iTunes: https://itunes.apple.com/

Keyword Search: Custom Dynamics or CCM-5BTS

Important: Module should be secured after installation in an area

away from heat, water and any moving parts. We recommend the

use of tie wraps (sold separately) to secure the module and wires to

prevent them from getting cut, frayed, or pinched. Custom Dynam-

ics is not liable for damage as a result of improperly securing or

failing to secure the remote or the wiring.

Note: The functions available from the provided key fobs vary from

the functions available in the Bluetooth controller. Please read in-

structions completely before operating.

Operational Note: During the Dim Slider function, dropping to 30%

or lower while in breathe/strobe or zone transition modes will de-

crease the voltage cycle significantly, which may cause subtle vari-

ances in the zone transition speed or strobe/breathe speed. This is

normal operation of the Remote.

M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

ATTENTION

Please read all Information below before Installation

05-2016SM