DK-TEC HNEFGCH Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Landwirtschaftliche Geräte DK-TEC HNEFGCH herunter. DK-TEC HNEFGCH 16 Seiten. Flail mower

Seite drucken

5. Service and maintenance

Liquids and lubricants

1. Fat: Use multi-purpose lithium based fat

2. Gearbox: Use SAE 80/90 gear oil

3. Lubricant storage: Your flail mower can work a lot of efficiency, but only if clean lubricants are

used. Use clean containers to handle all lubricants. Store the lubricants in an area where

they are protected from dust and moisture, among other things.

Grease

•

When lubricating grease

•

Wipe the area to be smeared in grease before applying new grease .

•

Replace all broken nipples.

•

If the nipples do not take on the grease, then remove the current grease and dust and clean the

nipple.

Maintenance:

Proper maintenance and adjustment are the key to long service life. With careful and systematic

control, you can avoid expensive maintenance, save time and repair.

Caution:

For safety reasons, each maintenance must be carried out with the tractor's PTO disconnected,

the flail mower must be lowered to the ground and the tractor's engine turned off with the

ignition key removed.

•

using the flail mower for several hours, all bolts

After

tight and PTO's tension is also checked.

•

Replace worn and damaged parts and illegible safety labels. New security labels are

available from DK-TEC

Replacing the blades:

IMPORTANT: Make sure the knife has the same length and weight as the others on

mower. This will keep the rotation of the rotor balanced.

1. Remove bolt and nut.

2. Remove old knife.

3. Install new knife and existing bolt.

4. Secure with nut.

Storage:

At the end of the working season or when

extended period of time, it

accumulated in the flail mower and in each of the moving parts.

1. Clean as needed .

2. Check knives for wear and replace if necessary.

3. Inspect the flail mower for loose, damaged , or worn parts and adjust or replace as

needed .

4. Store the flail mower inside if possible, for a longer service life.

5. Repair parts where the paint is worn or scratched to avoid rust.

6. Replace any damaged or missing safety labels.

a handhold grease gun

, use

the

good practice to clean

checked to be sure that they are

are

flail mower

not going to be used

of dirt and grease that may have

09/2019

the

flail

for