DK-TEC SPLSE2206 Benutzerhandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medienkonverter DK-TEC SPLSE2206 herunter. DK-TEC SPLSE2206 16 Seiten. Mobile wood splitter, 22 tons 400 volt
Seite drucken•
Use the outrigger to prevent the wood splitter from moving during operation and to block
both decks.
•
Place the wood splitter in a horizontal position.
•
Lay a piece of wood against the wedge. (Maximum length: 54 cm)
•
Make sure your hands are away from the crush areas and the wedge.
Cautious!
•
If a piece of wood is stuck or will not split, push the control lever in the opposite
direction to remove the wood from the wedge.
•
If the piece of wood is still stuck or will not split, turn off the machine and use a
sledgehammer to remove the piece of wood.
•
Always keep your hands away from the piece of wood and the wedge while pulling it back.
5. Operation of the clover
Used only for horizontal splitting
Transport position
Support wheels. Must
be raised during
transport
Press the lever down
and lock carefully
Security split for use by
transport of the clover