DK2 SP3000 Montage- und Betriebsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Montage- und Betriebsanleitung für Winden DK2 SP3000 herunter. DK2 SP3000 14 Seiten.

1. Motor: Your 0.8 hp motor is powered by a 12 volt battery and provides power to

the gear mechanism which turns the drum and winds the strap;

2. Winch Drum: The winch drum is the cylinder on which the pulling strap is

stored. It can feed or wind the strap depending on the remote winch switch.

3. Pulling strap: Your winch has a

specifically for load capacity of 600lbs.

4. Mechanical Gear System: The reduction gears convert the winch motor power

into extreme pulling forces.

5. Braking System: Braking action is automatically applied to the winch drum

when the winch motor is stopped and there is a load on the strap. The braking

action is applied by a separate mechanical brake.

6. Control System: your winch is controled through a solenoid control box by

press button of the ATV power switch.

7. Solenoid: Power from the vehicle battery flows through the weather sealed

switch before being directed to the winch motor.

WINCH ASSEMBLY AND MOUNTING

1.6'(w) X2.4'(L)

nylon strap designed