ALTUS Du350 Produkthandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Produkthandbuch für Controller ALTUS Du350 herunter. ALTUS Du350 18 Seiten.

Duo Series

Doc. Code: CE113100

DU350 and DU351 modules have a protective film on the overlay to protect it from damage during transportation and handling

on the installation phase. Once the module is installed this film can be removed allowing better visualization of the keyboard and

display.

Software Installation

To perform the installation of MasterTool IEC development software, first you have to download the setup file on the Altus site

(www.altus.com.br). For more information on the programming installation, see the Utilization Manual (MU299606), or the

DU350/DU351 Utilization Manual (MU213100).

Dimensions in mm.

The diagnostic operands are listed in the special operands table, which is available at DU350/DU351 Utilization Manual

(MU213100)

Programming

The CPUs DU350 and DU351 PLC-HMI use the IEC 61131 standard languages, which are IL, ST, LD, SFC and FBD. We can

separate these languages in textual and graphical. The IL and ST are textual languages and they are similar to Assembly and C,

respectively. The LD, SFC and FBD languages are graphical. LD uses the representation of relays and blocks and are similar to

relay diagrams; SFC uses the representation of a sequence diagram, making easy the view of the sequence events; and, FBD

uses an arrangement of function blocks, allowing show clearly the functions performed on each action.

The programming is performed on the MasterTool IEC interface development. The IDE enables the use of five languages in the

same project, thus allowing enjoys the best characteristics of each, resulting in the development of an application robust and

easy to understand and maintain.

For more information about programming, see the Utilization Manual (MU299606), the IEC standard (61131-3) or the DU350/

DU351 Utilization Manual (MU213100).

Altus S. A.

DU350, DU351

Revision: G