DK2 Power OPC524 Montageanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Montageanleitung für Chipper DK2 Power OPC524 herunter. DK2 Power OPC524 15 Seiten.

STEP 4: INSTALL FEED CHUTE

1. Install the feed chute on the 2 hinges. To seat the hinge pins

for the first time a rubber mallet may be used to tap the

pins into the hinges. These are tight fitting to reduce

vibration noise.

2. Close the Chute and latch it.

3. Plug the safety key shut off wire connectors together.

4. You can now use the chute by the handles to tip the unit

back so you can perform the next step to install the hitch.