3M 1700 Series Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektor 3M 1700 Series herunter. 3M 1700 Series 8 Seiten. Overhead projector
Auch für 3M 1700 Series: Benutzerhandbuch (9 seiten)
Seite drucken
Color Tuning Dial
Rotate the color tuning dial (if equipped) to eliminate
the yellow/orange to brown or blue corners on the
screen.
1. Rotate dial to the left to remove blue corners.
2. Rotate dial to the right to remove yellow/orange
to brown corners.
Lamp Replacement
Use the proper lamp type for your projector.
To replace the lamp:
1. Turn projector off and unplug (1) the power cord.
2. Allow projector lamp and metal parts to cool.
3. Release cover latch (2) and lift up top cover to
access lamp (3).
4. Depress lever (4) to release lamp. Discard old
lamp.
5. Push new lamp (5) fully and squarely into socket.
6. Close the top cover.
Caution
!
To avoid burns to the fingers, allow projector
parts to cool before replacing lamp.
Caution
!
If a lamp cracks or breaks and deposits glass
fragments inside the projector body, use a vacuum
cleaner to remove. Touching sharp glass could
result in cuts to your fingers.
3M 1700 Operator's Guide
ENX – 82V, 360W
78-6969-8027-1
2
1
4
Caution
!
Use care when placing hands inside projector body.
Sharp or rough edges could cause abrasions or
cuts to fingers.
Caution
!
When the top cover is in the open position, use
care not to tip it over. If the cover slams shut, it
could result in pinching or bruises to your
fingers.
3
5
Page 4