Altusen ALTUSEN KH1508 Broschüre & Specs

Blättern Sie online oder laden Sie pdf Broschüre & Specs für Schalter Altusen ALTUSEN KH1508 herunter. Altusen ALTUSEN KH1508 2 Seiten. Cat 5 high-density kvm switch
Auch für Altusen ALTUSEN KH1508: Schnellstart-Quide (2 seiten), Spezifikationen (8 seiten)

Seite drucken
Online Registration
International:
• http://support.aten.com
North America:
• http://www.aten-usa.com/product_registration
Technical Phone Support
International:
• 886-2-8692-6959
China:
KH1508/KH1516 Cat 5 High-Density KVM Switch
• 86-10-5255-0110
Japan:
• 81-3-5323-7178
Korea:
© Copyright 2010 ATEN
®
International Co., Ltd. www.aten.com
• 82-2-467-6789
Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.
North America:
All rights reserved. All other trademarks are the property of their respective owners.
• 1-888-999-ATEN Ext: 4988
United Kingdom:
PAPE-1214-Q00G Printing Date: 12/2010
This product is RoHS compliant
• 44-8-4481-58923
1
Package Contents
The KH1508 / KH1516 package consists of:
1
KH1508 or KH1516 Cat 5 High-Density KVM Switch
1
Firmware Upgrade Cable
1
Power Cord
1
Rack Mount Kit (brackets and Phillips hex M3X8 screws)
1
Foot Pad Set (4 pcs.)
1
User Manual
1
Quick Start Guide
2-1
Requirements
Console
• A VGA, SVGA, or multisync monitor capable of the highest resolution that you will be
using on any computer in the installation.
• A PS/2 style mouse
• A PS/2 style keyboard
Computers
The following equipment must be installed on the computers that connect to the KH1508 or
KH1516's KVM ports:
• A VGA, SVGA or multisync port
• A Type A USB port and USB host controller (for USB KVM Adapter Cable Connection,
see below)
• 6-pin mini-DIN keyboard and mouse ports (for PS/2 KVM Adapter Cable Connection, see
below)
2-2
Requirements
KVM Adapter Cables (CPU Modules)
• Cat 5e/6 cable is required to connect the KH1508 / KH1516 to one of the KVM Adapter
Cables.
• The following KVM Adapter Cables are required for use with the KH1508 / KH1516:
Function
Module
Connect to devices with PS/2 ports
KA9520
Connect to devices with USB ports
KA9570
Connect to Sun Legacy systems (with 13W3 port)
KA9130
Connect to Sun USB systems
KA9170
Connect to serial based devices
KA9140
3
The KH1508 / KH1516 Unit (Front View)
1. Port Selection Switches
2. Port LEDs
3. Reset Switch
4. Firmware Upgrade Recovery Switch
1 & 2
5. Firmware Upgrade Port
6. Power LED
7. Station ID LED
3
1 & 2
3
4
The KH1508 / KH1516 Unit (Rear View)
1. Power Socket
2. Power Switch
3. Daisy Chain Ports
4. Local Console Port Section
5. KVM Port Section
1
2
3
4
1
2
3
4
5
Hardware Installation 1
Rack Mounting
The KH1508 / KH1516 can be mounted in a 19" (1U) racks. The mounting brackets can
screw into either the front or the back of the unit so that it can attach to the front or the back
of the rack. To rack mount the unit:
1. Remove the screws at the front or the rear, as shown in the diagram below.
Phillips head hex
M3 x 6
Phillips head hex
M3 x 6
2. Screw the mounting brackets into the sides of the unit at the front or the rear, as shown in
the diagram below.
KH1508
4
5
6
7
Phillips head hex
M3 x 8
KH1516
4
5
6
7
3. Slide the unit into the front or rear of the rack and secure it to the rack.
KH1508
5
KH1516
5