DKB HEAT 3 burner bbq Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Grill DKB HEAT 3 burner bbq herunter. DKB HEAT 3 burner bbq 13 Seiten. Dkb heat 3 burner bbq 30 mbar owners manual

Seite drucken

CHANGING A GAS BOTTLE – BUTANE

This bbq may be used with butane at an operating pressure of 28 - 30 mbar.

NEVER use an unregulated gas supply or a regulator for other operating pressures.

WARNING: Changing a gas bottle must be carried out in a ﬂ ame free environment.

BUTANE gas bottles have various types of connections.

Leak test all connections before operating the bbq.

A) SCREW-ON CONNECTION.

The most important part is the black sealing washer. Always check

that it is present and not damaged when changing gas bottles. Some

screw on connections have a hand wheel to tighten and some require

a spanner to tighten. Tighten ﬁ rmly (left hand thread). When using a

spanner, do not over tighten as this can damage the washer.

CONNECTING A GAS BOTTLE

Screw-om connection

1. Check that the gas bottle valve

is OFF by turning clockwise.

2. Remove protective cap and

keep for later use.

3. Inspect the black washer for

damage before connecting.

4. Fit the connecting nut to the

gas bottle, using the correct

spanner or connecting hand

wheel. (Left hand thread).

Do not over tighten Butane

gas bottle connectors.

5. When gas is required turn the

gas bottle

valve

anti-

clockwise.

Switch-om connection

1. Remove the orange safety cap

by pulling the lanyard out,

then up.

Do not

use tools,

leave the

cap hanging.

2. Make sure that:

– All taps on the gas bbq are

closed.

– The switch is

in the off

position.

3. Place the "Quick On" regula-

tor on to the valve and push

down ﬁ rmly. A "click" sound

should be heard to ensure the

switch is

securely

latched.

4. When gas is required turn the

switch upward to

the ON

(12 o'clock)

position.

B) SWITCH-ON CONNECTION.

No tools are required for this type. On/Off control of the gas supply

is provided by a switch on the Regulator or on a special adapter. If

you use an adapter with an old type threaded regulator, please

ensure that the union nut is tightened ﬁ rmly to the adapter with a

spanner.

DISCONNECTING A GAS BOTTLE

Screw-om connection

1. Turn the gas bottle valve OFF

(Clockwise rotation).

2. Turn off the gas taps on the bbq. WAIT until the burner has gone

out.

IF THE FLAME DOES NOT GO OUT-TURN THE VALVE OR SWITCH

BACK TO ON. LEAVE THE APPLIANCE ALIGHT AND CALL YOUR

GAS SUPPLIER.

3. NEVER REMOVE the regulator

(or connecting nut) with the

gas bottle valve open.

4. REMOVE the regulator (or

connecting nut) with the

spanner or connecting hand

wheel. (Left hand thread).

4. REPLACE the plug or cap onto

the empty

gas bottle

or part

full cylin-

der if not in

use.

Switch-om connection

1. Turn the switch to the OFF

(3 o'clock) position.

3. Remove the "Quick On" regula-

tor by pressing horizontally

on the switch and pulling

upwards at the same time.

4. REPLACE the seal cap onto the

empty cylin-

der, or part full

gas bottle if not

in use.