Customatic Galaxy CUSGX01 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Inneneinrichtung Customatic Galaxy CUSGX01 herunter. Customatic Galaxy CUSGX01 16 Seiten. Adjustable bed

Seite drucken

Special Functions

Resetting your system

Resetting the system is sometimes necessary to restore the system to its factory setting, clear a system error, or

change a tandem system to a single system or to two independent systems.

Unplug the power cord from the electrical outlet.

FLAT

Press and hold the

the control box, and then plug the power cord back in.

Wait for 7 seconds, and then release the

NOTE:

The control box must receive the Flat signal from the

remote control for at least 5 seconds after the power cord is

plugged back in. The reset is complete.

Pair the remote control with the control box again. For

more information, see "Pairing your remote control to your

adjustable bed" on page 12.

Using the mounted USB ports

The convenient USB ports located on each side of your adjustable

bed provide easy access for charging today's tech devices.

Activating the emergency power down feature

Your adjustable bed supports the emergency power down feature when a power failure occurs while the head and/

or foot sections are raised.

Locate and remove the cover on the 9V battery compartment

of your control box.

Install two (2) alkaline 9V batteries (not included with the

adjustable bed). Replace the battery cover.

When the 9V batteries are installed and a power failure occurs,

press the

FLAT

button on the remote control for the bed to

return to a flat position.

NOTE:

The 9V batteries are for single use only. After lowering

the adjustable bed once during a power failure, replace with a

new set of batteries.

button to continue sending a signal to

FLAT

button.