CUSTOMGADZ mimicsG4 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mediaplayer CUSTOMGADZ mimicsG4 herunter. CUSTOMGADZ mimicsG4 15 Seiten.

5. Quick start guide - First time pairing

First time pairing iOS

Ensure you have the latest Firmware installed. If not see "Section

Ensure you have the latest Firmware installed. If not see "Section 6"

•

Download the "MimicsX2 Driver" from Cydia

•

After installing make sure you

After installing make sure you ''Reboot' your device. Press and hold the power button to see an

•

'Slide to power off' then

Connect your device so its mirroring on your external touchscreen monitor. This is either done via

•

cable or a WIFI connection. If you are unsure how to do this see "section X"

Connect the supplied Blue

Connect the supplied Bluetooth dongle and either a USB touchscreen or the 8

•

connected to a touchscreen adapter (such as the switcher board)

Turn on the MimcisG4 by plugging in a micro USB cable into the power port and after a few

•

moments you should see a RED light flashing. If you don't see this, press and hold the capacitive

moments you should see a RED light flashi

button (between the PWR and USB1 connector) and hold it for approximately 10 s

button (between the PWR and USB1 connector) and hold it for approximately 10 seconds. As you

press this button, the touch indicator will light.

press this button, the touch indicator will light

Go into Settings > Bluetooth and make sure the MimicsG4 is "Un-paired" before attempting to

Go into Settings > Bluetooth and make sure the Mimics

•

connect it to a new iOS device

If you see this icon

press it to 'un-pair'

the MimicsX2

''Reboot' your device. Press and hold the power button to see an

turn you phone of. Press the power button to restart.

tooth dongle and either a USB touchscreen or the 8-pin cable

ng. If you don't see this, press and hold the capacitive

Press here to

'forget' or 'un-pair'

paired" before attempting to

MimicsX2 is

now 'un-paired'