DKM Motor GEARHEAD Benutzerhandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Motor DKM Motor GEARHEAD herunter. DKM Motor GEARHEAD 20 Seiten.

In case of abnormal operation of motor and gearhead, please

refer to below table and make inspection. If motor doesn't

operate normally even inspection result is normality even after

checking, do not repair voluntarily or disassemble motor but

contact DKM head office or local agent. Please be noted that

for the problem caused by user's voluntary repair of disassembly,

DKM doesn't take responsibility and A/S may be impossible.

PHENOMENON

Output shaft does not

rotate or runs slow.

Sounds abnormal noise

Output shaft stops

suddenly.

CHECKING POINT

1) Is proper voltage applied to the motor?

2) Are lead wires connected correctly?

3) Is the load too large?

4) Is capacitor connected as diagram

and same value as written on label?

1) Are motor and gearhead mounted

correctly?

2) Did you use same type of gearhead

shaft as motor shaft?

1) Is the motor TP(Thermal Protector) type?

2) Did transmission components get

damaged or did not connect properly?

3) Does motor or gearhead end the life

expectation?

4) Does output shaft break down?

5) Gears can get damaged if only motor

runs. (If so, it may over loaded, please

check permissible torque refer to '3.3

Permissible Torque of Gearhead.)

5. Troubleshooting