Alu Rehab NETTI DYNAMIC BASE Handbuch - Seite 12
Blättern Sie online oder laden Sie pdf Handbuch für Wheelchair Alu Rehab NETTI DYNAMIC BASE herunter. Alu Rehab NETTI DYNAMIC BASE 16 Seiten.
Seite drucken
FUNCTION CHECK BEFORE DELIVERY TO USER/CUSTOMER
Check that the wheelchair is adjusted according to order.
Visual check:
– All pins, plugs and screws are correctly fitted.
– Check the sewing in the Velcro back, no loose threads shall be seen.
– Check that the seating plate is in good condition and correctly adjusted for seat depth.
– Check that the Netti Comfort seat plate fabric is intact.
Make sure the user manual for the wheelchair is at hand by refurbishing.
Function
Model
Tilt
Netti III family
Netti S,
Netti 4U family
Netti Dynamic family
Back-
Netti III family
recline
Netti S,
regulation
Netti 4U family
Netti Dynamic family
Push
All wheelchairs,
handles
except
Netti 4U CED and
BASE
Push bow
Netti 4U CED
Head
All wheelchairs
support
Arm
Netti III family
support
Netti S,
Netti 4U family
Netti Dynamic family
12
Test/check
Move the tilt functions in both outer positions
and check there is free movement. Check that
wires run free of obstructions. Check that the tilt
function is marked with correct labels.
Move the back recline regulation in both outer
positions and check there is free movement.
Check that wires run free of obstructions. Check
that the recline function is marked with correct
labels.
Check that hand grips are free from abrasion and
damage. Check that driving handles adjust freely
and lock in position. Check that the stop screw
and the small steel plate are correctly fitted.
Check that the push bow is secure and lock in
position.
Check that the small set screw in the centre on
top of the head support adapter is tightened and
that the small steel plate is correctly mounted.
Check the head support is clean and intact and
that adjustment handles function correctly.
Check that the arm support pads match and are
adjusted similarly on both sides. Check that the
height adjustment locks correctly.
Adjust the plastic screws in the arm support
bracket and tighten the lock nut, the arm support
should slide easily within the arm support brack-
et. The stop screw should be adjusted to the same
height on both sides.
The slide mechanism should operate easily. Check
that the arm support locks when swung forward.
Done/OK
Washing manual for manual wheelchairs
Version: 2022-05