Alukov TERRA R PRIME Handbuch für Betrieb und Instandhaltung - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Instandhaltung für Motor Alukov TERRA R PRIME herunter. Alukov TERRA R PRIME 7 Seiten. Motor units

Seite drucken

Following these steps will ensure a smooth operation of the motorized sliding of TERRA PRIME, TERRA R PRIME and VIVA PRIME.

Content of motor set:

The motor units for TERRA PRIME, TERRA R PRIME, and VIVA PRIME provides motorized sliding of the enclosure (opening / closing).

The average opening and closing frequency is 4 cycles during the day (depending on the intensity of the sunlight and the weight of the segments). Dependence on

the intensity of solar light to the charge rate of the motor battery is illustrated by the following graph.

A graph of depedency of charge rate of the motor battery on the intensity on sun light.

Safety:

• Motors set of the enclosure TERRA PRIME, TERRA R PRIME and VIVA PRIME is always necessary to operate from the maximum distance of 3-5m from the antenna

and under constant visual control by the operator.

• Opening: When opening the segments of the enclosure, always make sure that no one that no one is present in the enclosure path and nothing is left in the way

of the moving segments.

• Closing: When closing the segments of the enclosure, it is always necessary to make sure there is no one in the pool or in the way of the moving segments.

• Security code: The motor unit is equipped with a security code that allows activation of the motors for 15 minutes (by the help of the remotel). After this time,

the remotes are disabled.

• This setting minimizes the chance of accidentally opening the closed enclosure.

• Permanent hold of the button on the remote control while operating with the enclosure forces the operator to oversee the entire shift.

Unlocking of the remote controls:

Slowly press the buttons in the following sequence: A, B, B, A. Each time you press, you have to hear a short beep (2/10 seconds), which means that pressing of the

remote

control in the correct sequence. A long beep (1 second) indicates an error, in which case repeat the procedure.

Motor operation:

• By long pressing and holding button A or B on the remote control opens the enclosure.

• By long pressing and holding button B or A on the remote control closes the enclosure.

• Correction of direction of the segments movement (correction of enclosure overlay): Long press of button C or D remote control triggers both motors in the

opposite direction (2/10 seconds) and the segment is rotated to one side or the other.

Maintenance:

• Clean the solar panel twice a year with a wet notabrasive cloth (more often if necessary).

• Never remove batteries (even in winter). The solar panels must be kept clean in order to recharge the batteries. In winter keep the solar panels clean and clear

of snow.

• It is possible to move the segments manually. If the locking system (which is incorporated in the engine) is not working, it is possible to disengage the segment

manually and move them by hand.

Emergency disarming of the arrestment:

• In the event of emergency disengagement of the arrestment (in the event that the engines stop working) proceed as following:

• A plastic cover is located on the front of the engine housing. Remove this cover with a small screwdriver (see photo 1, 2 and 3).

2 - 4 motor units ( 350 - 600 N, 12 V DC)

2 solar panels (18V, 8W)

2 ks Electronic cards (main, secondary)

2 ks Electric arresments

2 ks Remote control (black, white)

1 ks Antenna

2 ks baterries 12V 8,5 Amp/h

The batteries are fully charged and ready for operation.