Alula RE667 Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Touch Panel Alula RE667 herunter. Alula RE667 12 Seiten. Slimline touchpad
Auch für Alula RE667: Handbuch (13 seiten), Handbuch (12 seiten)

Seite drucken

4. Mount the Touchpad. Refer to section "Touchpad Mounting Options" for mounting

instructions.

5. Enroll the Touchpad by pressing the enroll button on the side of the panel until it beeps once

and then selecting the desired panel on the Touchpad. Note, the Touchpad will list all panels

within range, not just the ones in enrollment mode. The network "names" will include the last

4 digits of the MAC Address printed on the panel label.

After selecting the desired panel, the Touchpad will progress through stages of discovery

and authentication. Upon success it will show the DISARMED screen. If the wrong panel was

selected, press the "Restart"button in the side menu.

Troubleshooting Steps if Enrollment Fails:

• Confirm the panel is disarmed and in wireless enrollment mode. A red light will flash

on the panel if in wireless enrollment mode.

• Check whether the panel is already full. The limit is four Touchpads. To confirm

number of Touchpads connected, log into your account.

• Tap the "Restart" button to try again.

6. Test the Touchpad by arming and disarming the panel from the Touchpad.

Touchpad Mounting Options

Table Top Mounting

1. Connect the power adapter by inserting the connector into the black port. Once inserted,

turn the connector to the right to lock into place.

9EF8