Alula RE314 Schnellstart-Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Rauchmelder Alula RE314 herunter. Alula RE314 13 Seiten. Smoke alarm dsc compatible

Seite drucken

Alarm (see Figure 7b).

Figure 7a

- How to Tamperproof

Figure 7b

- How to Remove

PUSH UP CATCH & TWIST

ALARM ANTI-CLOCKWISE TO REMOVE

If necessary it is possible to further secure

the Alarm by using a No.2 or No.4 (2 to 3mm)

(1/8") diameter - not supplied) self tapping

screw 6 to 8mm (1/4") long (see Figure 7d), to

firmly lock the Alarm and its mounting plate

together (see Figure 7c).

Figure 7c

Figure 7d

SELF TAPPING

Attach the Alarm to the mounting plate.

Line up the screw (not supplied) on the "U"

shaped recessed area shown in Figure 7c and

screw firmly home.

BREAK OFF

SMALL PILLAR

TAMPERPROOF SCREW

SCREW

2 to 3 mm

To remove the Alarm from the ceiling,

remove the screw first, and then twist off

anti-clockwise.

7. Testing, Maintenance and

Power Supply Monitoring

Your Alarm is a life saving device and should be

checked periodically.

7.1 Manually Testing your Alarms

It is recommended that you test your Alarms

after installation and then at least weekly to

ensure the units are working. It will also help

you and your family to become familiar with

the sound of the Alarms.

- Press and hold the Test Button until the

Alarm sounds and the red light flashes (see

Figure 7). The Alarm will stop sounding shortly

after the button is released.

- Repeat this procedure for all other Alarms in

the system.

WARNING: Do not test with flame.

This can set fire to the Alarm and damage the

house. We do not recommend testing with

smoke as the results can be misleading unless

special apparatus is used.

When you press the Test button it simulates

the effect of smoke in a Smoke Alarm which it

could experience in a real fire.

7.2 Test/Silence Button to Control Nuisance

Alarms

The Smoke Alarms have a combined Test/

Silence button to help you control nuisance/

false alarms.

If, when the Alarm sounds, there is no sign of

smoke or noise to indicate that there is a fire,

it should be assumed that it is due to an actual

fire and the dwelling should be evacuated

immediately.

Check the house carefully in case there is a

small fire smouldering somewhere.

Check whether there is some source of smoke

or fumes, for example cooking fumes being

drawn past the Alarm by an extractor.

If there are frequent nuisance/false alarms

it may be necessary to re-locate the Smoke

Alarm away from the source of the fumes.

If you installed Alarms with RF modules and

did not House Code / enroll them in your

system, you may be receiving alarm signals

from a neighbouring system. This can be easy

rectified by "House Coding" your Alarms - see

relevant RF Module Instruction booklet.

1. To cancel a false alarm from a Smoke Alarm

(which has its red light flashing rapidly), press

the Test/Silence button (the Smoke Alarm will

automatically switch to a reduced sensitivity