DKS 1520 series Installations- und Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für IP-Zugangssteuerungen DKS 1520 series herunter. DKS 1520 series 16 Seiten. Stand alone card readers or controller
Auch für DKS 1520 series: Handbuch (2 seiten)
Seite drucken
2.4 Time Zones
There are two types of time zones that can be used with the 1520; CARD time zones and HOLD time zones.
CARD time zones are applied to the individual card codes programmed into the system.
HOLD time zones activate and deactivate the relay in the 1520 at predetermined times.
There are SIX CARD time zones - referenced as time zones 0 through 5. Only time zones 2 through 5 are programmable.
Time zone 0 will always DENY a card entry.
Time zone 1 will always GRANT a card entry.
The FOUR HOLD time zones - referenced as time zones 6 through 9. They are programmable.
Time zone beginning and ending times must be entered in a four-digit 12-hour format (hr/min).
Example: 8:30 is entered as 0830; 11:45 is entered as 1145.
You need to program what days of the week the time zone will be active. All days of the week MUST be entered as a seven digit
number; Sunday = 1, Monday = 2 ...... Saturday = 7. If you want to skip a day (not active), enter # for those days to be skipped.
Note: All active days are entered first, then skipped days when programming the seven digit number.
Examples:
If a time zone is to be active Monday through Friday only, you need to enter: 2 3 4 5 6 # # in the programming sequence.
If a time zone is to be active on the Weekend only (Saturday, Sunday), you would enter 1 7 # # # # # in the programming
sequence.
2.4.1 Programming CARD Time Zones
1. Press
3 8 and enter the MASTER CODE. [
*
2. Enter a single-digit time zone number (0 - 5), then press
Note: Only 2-5 are programmable, Time zone 0 will always DENY entry, Time zone 1 will always GRANT entry.
3. Enter the four-digit time zone START time (Hr/Min), then press
4. Enter 0
for AM OR enter 1
*
5. Enter the four-digit time zone END time (Hr/Min), then press
6. Enter 0
for AM OR enter 1
*
7. Enter the seven-digit days of the week that the time zone is active and skipped, then press
Note: All active days are entered first, then skipped days (#). ALL seven digits MUST be entered.
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7, Skipped Day = #.
8. Repeat steps 2 - 7 to enter additional time zones.
9. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
2.4.2 Programming HOLD Time Zones
1. Press
3 8 and enter the MASTER CODE. [
*
2. Enter a single-digit time zone number (6 - 9), then press
3. Enter the four-digit time zone START hold time (Hr/Min), then press
4. Enter 0
for AM OR enter 1
*
5. Enter the four-digit time zone END hold time (Hr/Min), then press
6. Enter 0
for AM OR enter 1
*
7. Enter the seven-digit days of the week that the hold time zone is active and skipped, then press
Note: All active days are entered first, then skipped days (#). ALL seven digits MUST be entered.
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7, Skipped Day = #.
8. Repeat steps 2 - 7 to enter additional hold time zones.
9. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
2.4.3 Delete Time Zones, one at a Time
1. Press
3 9 and enter the MASTER CODE. [
*
2. Enter a single-digit time zone number to be deleted (2 - 9), then press
3. Repeat step 2 to delete additional time zones.
4. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
8
3 8 _ _ _ _ (beep)]
*
for PM. [ _
(beep)]
*
*
for PM. [ _
(beep)]
*
*
3 8 _ _ _ _ (beep)]
*
for PM. [ _
(beep)]
*
*
for PM. [ _
(beep)]
*
*
3 9 _ _ _ _ (beep)]
*
. [ _
(beep)]
*
*
. [ _ _ _ _
(beep)]
*
*
. [ _ _ _ _
(beep)]
*
*
. [ _
(beep)]
*
*
. [ _ _ _ _
(beep)]
*
*
. [ _ _ _ _
(beep)]
*
*
. [ _
(beep)] (This cannot be UNDONE)
*
*
. [ _ _ _ _ _ _ _
(beep)]
*
*
. [ _ _ _ _ _ _ _
(beep)]
*
*
1520-065-E-7-16