Artos 45-725 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kutter Artos 45-725 herunter. Artos 45-725 10 Seiten. Wire prepper lite

Changing Unit of Measure

Press the Decimal Button "."

‐

Press 1 for inches and press 2 for centimeters.

‐

Voltage Selection

To change selected voltage: remove the fuse cartridge using a small blade screwdriver or similar

tool; select the desired voltage by matching the arrow on the fuse cartridge to the arrow

located on the front of the unit (lower right corner); replace the fuse cartridge making sure the

voltage selection arrow aligns with the arrow located in the front of the unit.

Fuse Replacement

Remove the fuse cartridge using a small blade screwdriver or similar tool. Replace two 3 AMP,

3AG time delay or 3.15 amp, 5 x 20 mm. Time delay fuses, and insert the fuse cartridge back

into the unit; making certain the PROPER VOLTAGE SELECTION ARROW aligns with the

rectangle located below the fuse receptacle.

Blade Replacement

Unplug the unit

‐

Loosen the screw holding the blade (use 0.05 hex wrench) and replace the blade.

‐

Voltage Selection Arrow