Aluprof ER-P Series Programmierhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Programmierhandbuch für Motor Aluprof ER-P Series herunter. Aluprof ER-P Series 8 Seiten.
Auch für Aluprof ER-P Series: Programmierungshandbuch (9 seiten)

Seite drucken
Aluprof ER-P Series Programmierhandbuch
Is important to adjust the sensitivity of the overload mechanism to the size of the roller shutter.
4. SWITCH TO PROGRAMMING MODE
I
Turn on the motor's power supply.
II
Turn on the motor's power supply.
III
Press and hold "TOP" button.
5. MEMORIZING THE TRANSMITTER
Switch to programming mode
according to point 4.
For the AC116-04 transmitter, instead of the „UP" button, press the selected channel number twice.
We reserve the right to any technical change.
Valid on 2022.01.27
PROGRAMMING MANUAL FOR AM45 MOTORS ER-P SERIES
Press and hold the
programming button
on the motors head
for 2 seconds.
Press and hold the „STOP"
button for 5 seconds.
After 3 seconds, turn on the power to
the motor. Release the button.
Press the „UP" button.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
Programming mode activated.
Programming mode
activated.
Programming mode
activated.
The transmitter has been added.
3