Aluprof DC 661 Programmierhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Programmierhandbuch für Transmitter Aluprof DC 661 herunter. Aluprof DC 661 4 Seiten.

2. PROGRAMMING THE TRANSMITTER

2.1. Operating mode change

1. The manual control mode „MAN": without time control function

2. The automatic control mode „AUTO": with time control function

3. The random control mode: Timer function with a randomly selected time in the range of ± 15 minutes from the set

automatic time.

0 - Manual operating mode

1 - The automatic or random control mode (programming of the automatic working hours for each day of the week)

2 - The automatic or random control mode (programming of the automatic working hours for the whole week)

3 - The automatic or random control mode (programming of the automatic working hours individually Mo.-Fr., Sat., Sun.)

Press and hold the „P2"

button for 3 seconds to switch the

transmitter to MAN manual control

mode

The next press of the „„ P2 ""

button for 3 seconds will switch the

transmitter to firstrandom control

mode

DC 661 PROGRAMMING MANUAL

Then press the „P2" button for 3

seconds. The transmitter switches

to the first automatic control mode

„AUTO"

The next press of the „" P2 "" button

for 3 seconds will switch the

transmitter to second random

control mode

Then press the „P2" button for 3

seconds. The transmitter switches to

the second automatic control mode

The next press of the „ P2 " button for

3 seconds will switch the transmitter

to third random control mode

Then press the „P2" button for 3

seconds. The transmitter switches to

the third automatic control mode

Pressing the button again switches

between consecutive modes.

We reserve the right to any technical change. Valid on 2019.04.12