DLP Discovery D4100 Montageanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Montageanleitung für Mikrocontroller DLP Discovery D4100 herunter. DLP Discovery D4100 5 Seiten.

Seite drucken
1. Connecting Flex Cable(s) to DMD Board
Locate end of the flex cable labeled DMD END
4
Position DMD Assembly face down
4
Unscrew flex cable screws from backer plate
4
Position backer plate under DMD board
4
Align flex cable screws and pins to corresponding holes on DMD board
4
Screw flex cable(s) in place making sure not to overtighten
4
a.
c.

Section 3: Hardware Setup

Figure 3-1. Connecting Flex Cable(s) to DMD Board
b.
d.
Backer Plate
3