3M Digiral Walldisplay 9000PD Kurzreferenz-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Projektor 3M Digiral Walldisplay 9000PD herunter. 3M Digiral Walldisplay 9000PD 12 Seiten.

3M Digiral Walldisplay 9000PD Kurzreferenz-Handbuch
computer & interactive stylus
9200IW • 9200IC
Note: If you do not have the
eBeam software installed
on your computer, you can
install it from the 3M Digital
WallDisplay CD-ROM.
1. Connect the VGA cable
from the VGA/Monitor port
on the computer to the VGA
on the Digital WallDisplay.
2. Connect the serial cable
from the serial/COM port
on the computer to the
Computer on the Digital
WallDisplay.
3. Connect the PC Audio
cable
from the
Headphones jack on the
computer to the PC Audio on
the Digital WallDisplay.
4. Press the On/Off button
on the Digital WallDisplay to
turn on the lamp.
Note: If you are using a
laptop, toggle the display
function by using one of
the following methods:
Fn +
or
Fn + LCD/CRT.
5. Double-Click the eBeam
desktop icon on your
computer
to launch the
whiteboard software.
6. Click the Calibrate button
in the 3M Digital WallDisplay
calibrate dialog box.
7. Tap each of the highlighted
targets
with the interactive
stylus.
8. Use the eBeam annotation
tools
to annotate your
presentation.
1-800-328-1371
�����
���
�����
������� ���
��
��
�����
�����
���
�������
5
�����
���
������
�����
��������
www.3M.com/meetings
������
������������