3M Digital Media System 700P Series Handbuch zur Produktsicherheit - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch zur Produktsicherheit für Projektor 3M Digital Media System 700P Series herunter. 3M Digital Media System 700P Series 16 Seiten.

Seite drucken

™

Digital Media System 700P

• To reduce the risk associated with exposure to hazardous voltage:

- Do not remove any screws other than those specified in the lamp replacement instructions.

• To reduce the risk associated with hazardous voltage:

- Do not operate this projector in wet environments or outdoors.

- Do not modify this projector or power cord.

- Do not attempt to service the projector; other than the lamp cartridge there are no user

serviceable parts inside the projector.

- Contact a 3M authorized service provider for service.

- Disconnect power cord when the projector is not in use, during lamp replacement, and while

cleaning.

- Do not allow water or other liquids to enter the projector.

• To reduce the risk associated with hazardous voltage and/or fire:

- Replace power cord if damaged.

- Contact a 3M authorized service provider if the projector becomes damaged.

- Use a grounded extension cord with a rating at least equal to that of the projector.

- Connect this projector to a grounded outlet.

• To reduce the risk associated with hot surface of lamp cartridge:

- Unplug the projector from the electrical outlet and allow the lamp to cool for 60 minutes before

replacing the lamp.

• To reduce the risk associated with choking:

- Keep the battery and battery cover away from children and pets.

• To reduce the risk associated with environmental contamination due to mercury:

- Hg: Lamp contains mercury. Don't throw in trash. Dispose according to local, state, or federal laws.

See www.lamprecycle.org or call 1-800-328-1371.

• To reduce the risk associated with lamp rupture related hazards:

- In event of lamp rupture, call 3M authorized service provider for repair. Ruptured lamp repair is

not user serviceable.

- Wash your hands thoroughly if contact with ruptured lamp debris has taken place.

- Ventilate the area where the lamp rupture occurs. The lamp operates at high temperature.

• To reduce the risk associated with hazard voltage, and/or impact, and/or tripping, and/or

intense visible light:

- Do not use this projector around unsupervised children.

• To reduce the risk associated with sharps, premature lamp failure, exposure to mercury:

- Always handle the fragile lamp module with care.

- Replace the lamp module when the lamp replacement message appears.

- Never replace the lamp module with a previously used lamp module.

WARNING

Introduction