AKO K 810 Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Heizgerät AKO K 810 herunter. AKO K 810 6 Seiten.
Auch für AKO K 810: Betriebsanleitung (6 seiten), Betriebsanleitung (6 seiten)

Seite drucken

Dear customer,

Thank you for purchasing this appliance. You have purchased a quality product which has been

manufactured to and complies with all of the recognised technical CE safety norms.

To ensure your safety and complete satisfaction with the appliance, please read the operating

instructions carefully before using it. Please keep the operating instructions in a safe place and do

not pass on the appliance to other persons for use unless it is accompanied by the operating

instructions.

• The convector is to be used exclusively for heating rooms. The appliance is designed for normal

domestic use and similar applications.

• If the convector is to be mounted on the wall, please make sure that the mains power socket is

freely accessible at all times and that the convector is not mounted directly underneath it.

• Do not use the appliance in rooms with bath, shower or swimming pool or in the vicinity of wash

basins or water connections (see fig. 8).

• Keep a distance of 30 cm free, all around the appliance. The appliance must not be covered up,

otherwise this could lead to over-heating which could result in a fire (see fig. 7).

• The appliance can get hot at the air outlet grid during operation.

• The appliance may not be operated by children.

• Never use inflammable cleaning agents, like petrol, for cleaning the appliance. Do not use the

appliance in rooms where combustible gases can be present.

• Make sure that no water or other fluids can enter into the appliance.

• Make sure that no objects can enter into the appliance.

• Unplug the appliance before cleaning.

• Occasionally check the power cable for damage. A damaged cable can cause dangerous electric

shocks. In case of damage, the cable must be replaced. This should only be done by an expert, as a

special tool is necessary.

• Check whether the voltage on the type label agrees with the voltage supply in your home.

• The appliance may only be opened up and repaired by qualified personnel.

Technical specifications

Convector

K 810

Nominal voltage

Power

- 1 (OUT)

- 2 (750 W)

- 3 (1250 W)

Switched levels

- MAX (2000 W)

Thermostat with frost protection

Protection classe

Approx.dimensions

(W x H x D)

Approx. weight

CONSTRUCTION AND OPERATIONAL PARTS (see figures 1, 2 and 3 on page 2)

Air outlet grid

Air outlet grid for fan (only for K 820)

Support feet

Air intake grid

Connector cable

Your AKO convector

The AKO convector contains a powerful heating element. The heating power can be set to 750 W,

1250 W or 2000 W. The thermostat enables automatic temperature adjustment from frost protection to

around +35°C. The K 820 convector provides an additional fan.

After unpacking

- Check the appliance for visible damage.

If you should notice any damage, do not use the appliance. Please contact your dealer

immediately.

- Do not forget to unpack the support feet

- Please dispose of the packaging in an environmentally manner.

The following safety instructions should be observed

750 / 1250 / 2000 W

function

70 cm x 45 cm x 15 cm

. You will find them on the side of the packaging.

K 820

230V~ / 50 Hz

- 1 (OUT)

- 2 (750 W)

- 3 (1250 W)

- MAX (2000 W)

Thermostat with frost protection

function

- Fans

4,0 kg

Mains plug

Rotary knob

Thermostat

Fan switch (only for K 820)