AKO 555242 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitssystem AKO 555242 herunter. AKO 555242 16 Seiten. Gas leak detection + trapped person alarm

Seite drucken

2.- Equipment description

Alarm display

Visual alarm

Audible alarm

Mute /

Set Hold key

AKO-555242 / AKO-558242

Input

Constant green: Trapped person push-button

connected.

Quick-flashing red: Malfunction / wiring

fault in push-button.

Slow-flashing red: Push-button not detected

or disconnected.

Constant red: Trapped person alarm

activated.

Green constant: Gas transmitter / detector

connected.

Flashing green: Gas pre-alarm / alarm saved

Quick-flashing red: Malfunction / wiring

fault in gas transmitter / detector.

Slow-flashing red: Gas transmitter / detector

not detected or disconnected.

Constant red: Gas pre-alarm / alarm

activated.

Pressing for 3 seconds activates / deactivates the Set Hold mode (See page 9).

Pressing for 6 seconds activates / deactivates the maintenance mode (See page 10).

Pressing briefly deletes saved alarms (See page 9).

For gas alarm, pressing briefly silences the alarm tone

Trapped person alarms cannot be silenced.

AKO-558xxx models are not equipped with batteries.

SECURE

Input

PRE-ALARM

CONFIGURATION

AKO-555241 / AKO-558241

Input

Constant: Gas pre-alarm / alarm /

trapped person alarm activated.

Flashing: Malfunction / wiring fault

in detector / transmitter / push-

button.

Constant: Set Hold mode activated

Flashing: Maintenance mode activated

Power supply present

Bluetooth activated

(Only with CAMM module)

Constant green: Battery connected

Switched off: Battery disconnected *

Constant: CAMM module in operation

Flashing: CAMM module malfunction.

Gas alarm silenced

5552H402 Ed.03

jumper

AUTO-

push-button

(See page 8)