BluDot Hang 1 Montagehinweise - Seite 3

Blättern Sie online oder laden Sie pdf Montagehinweise für Inneneinrichtung BluDot Hang 1 herunter. BluDot Hang 1 4 Seiten.

Step 01

AT TA C H W A L L P E G

An anchor and fastener are included for

installation. Please consult your local

hardware professional to determine the

hardware best suited for your wall type.

If the mounting location is not positioned on a

stud, drill a 5/16" hole in the marked location

and insert anchor as shown. If the mounting

location is located on a stud, this step of

installing an anchor may be skipped. Instead,

drill a 1/8" pilot hole in the marked location.

Attach the wall peg to the wall using the

included fastener as shown.

Pt . 12 02 x 1

Pt . 8 0 36 x 1*

Step 02

AT TA C H B U M P E R S

Carefully place the mirror face down on a soft

surface. Peel the backing off of the bumpers

as shown to reveal the adhesive sticker. Attach

bumpers to the back side of the mirror by

sticking them to the mirror as shown.

NOTE: Do not peel the backing sticker off of

the mirror itself.

A S S E M B LY N O T E S

S E R V I C E @ B L U D O T. C O M | 2