Blue Angel BALE Series Betriebsanleitung und Teilehandbuch

Blättern Sie online oder laden Sie pdf Betriebsanleitung und Teilehandbuch für Water Pump Blue Angel BALE Series herunter. Blue Angel BALE Series 4 Seiten. Effluent

Seite drucken

See Warranty on page 3 for important information about commercial use of this product.

Description

An effluent system consists of a pump,

control switch and a basin. The system

is generally controlled by a float switch

with a piggy-back plug which accepts

the pump plug and in turn plugs into

an electrical outlet.

The float switch is a wide angle

differential switch that rises with the

liquid level and turns the pump on. As

the liquid level decreases, the float

lowers and turns the pump off. This

pump is intended for use in domestic

sump or effluent lift stations. It is

suitable for pumping effluent,

wastewater, ground water and other

non-explosive, non-corrosive liquids

with up to 3/4" solids.

will not pump raw sewage or any

substance exceeding 3/4" size.

Specifications

Power supply requirements ..................115V, 60 hz (BALE311A)

................................................................115V, 60 hz (BALE411A)

................................................................115V, 60 hz (BALE511A)

................................................................230V, 60 hz (BALE521A)

................................................................230V, 60 hz (BALE621)

Motor duty.............................................Intermittent

Motor .....................................................1 Phase, 3450 RPM

Horsepower ..........................................3/10 HP 6.0 amps (BALE311A)

................................................................1/2 HP 10.5 amps (BALE511A)

................................................................1/2 HP 5.3 amps (BALE521A)

................................................................1

Liquid temperature range ....................40°F to 140°F

Discharge ...............................................1

Switch .....................................................90

Power cord .............................................14 gauge 3 conductor w/plug

Length of Cord ......................................20 feet

REMINDER: Keep your dated proof of purchase for warranty purposes!

Operating Instructions and Parts Manual

Please read and save these instructions. Read carefully before attempting to assemble,

install, operate or maintain the product described. Protect yourself and others by observing

all safety information. Failure to comply with instructions could result in personal injury

and/or property damage! Retain instructions for future reference.

Effluent Pump

Safety Guidelines

This manual contains information that

is very important to know and

understand. This information is

provided for SAFETY and to PREVENT

EQUIPMENT PROBLEMS. To help

recognize this information, observe the

following symbols.

an imminently hazardous situation

which, if not avoided, WILL result in

death or serious injury.

a potentially hazardous situation

which, if not avoided, COULD result in

death or serious injury.

Effluent

a potentially hazardous situation

pumps

which, if not avoided, MAY result in

minor or moderate injury.

important information, that if not

followed, MAY cause damage to

equipment.

............4/10 HP 6.8 amps (BALE411A)

HP 16.0 amps (BALE621)

inch NPT

wide angle mechanical tether switch

............(No switch on BALE621)

Attach it to this manual or file it for safekeeping.

For parts, product & service information

visit www.blueangelpumps.com

CALIFORNIA PROPOSITION 65

or its power cord contains lead, a

chemical known to the State of

California to cause cancer and birth

defects or other reproductive harm.

Wash hands after handling.

General Safety

Danger

indicates

Information

1. Know the pump application,

limitations, and potential hazards.

Warning

indicates

Do not use to pump

flammable or explosive fluids

such as gasoline, fuel oil,

Caution

kerosene, etc. Do not use in flammable

indicates

and/or explosive atmospheres. Use pump

only with liquids compatible with pump

component materials. Failure to follow

this warning can result in personal

injury and/or property damage.

Notice

indicates

2. Make certain that the power source

conforms to the requirements of

this effluent pump.

Disconnect power before

servicing. If the power

disconnect is out of sight,

lock in the open position and tag it to

prevent unexpected application of

power. Failure to do so could result in

fatal electrical shock!

3. Release all pressure within the

system before servicing any

component.

4. Drain all liquids from the system

before servicing.

5. Secure the discharge line before

starting the pump. An unsecured

discharge line will whip, possibly

causing personal injury and/or

property damage.

6. Check hoses for weak and worn

condition before each use, making

certain that all connections are

secure.

BALE Series

This

product

332600-002 3/08