Blue Angel EC50 Betriebsanleitung und Teilehandbuch

Blättern Sie online oder laden Sie pdf Betriebsanleitung und Teilehandbuch für Water Pump Blue Angel EC50 herunter. Blue Angel EC50 13 Seiten. Self-priming portable utility pump

Seite drucken

Description

This self-priming portable utility pump is

designed to be used as a transfer pump

for such applications as emptying water

heaters, swimming pools, livestock tanks,

boats, etc. Pump can also be used for an

intermittent pressure boost for applica-

tions such as washing cars, cleaning dri-

veways, etc. The motor is air cooled; it is

not designed to operate under water.

NOTE: This pump is not intended for

permanent installation or long, extend-

ed periods of continuous operation.

Safety Guidelines

This manual contains information that is

very important to know and understand.

This information is provided for SAFETY

and to PREVENT EQUIPMENT PROB-

LEMS. To help recognize this informa-

tion, observe the following symbols.

Danger indicates

an imminently haz-

ardous situation which, if not avoided,

will result in death or serious injury.

Warning indicates

a potentially haz-

ardous situation which, if not avoided,

could result in death or serious injury.

Caution indicates a

potentially haz-

ardous situation which, if not avoided,

may result in minor or moderate injury.

Notice indicates

important informa-

tion, that if not followed, may cause

damage to equipment.

Specifications

Motor . . . . . . . . . . . . . .Single Phase - 120V, 60 Hz, 8,000 RPM . . . .Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/2 HP

Motor . . . . . . . . .Series Wound (brush type) AC/DC Operation . . . .Inlet/Outlet Openings . . . . . . . . . . . . . . . . . . . . . . .3/4" NPT

Impeller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SAN . . . .Pump Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cast iron

Motor Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cast iron . . . .Motor Shaft . . . . . . . . . . . . . . . . . . . . . . . .Cold rolled steel

Shaft and Volute Seal . . . . . . . . . . . . . . . . . . . . . . . . . . .Buna-N . . . .Motor Bearings . . . . . . . . . . . . . . . .Permanently lubricated

Maximum Fluid Temperature . . . . . . . . . . . . . . . . . . . . . .120˚F . . . .

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

Operating Instructions and Parts Manual

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or

maintain the product described. Protect yourself and others by observing all safety information. Failure to

comply with instructions could result in personal injury and/or property damage! Retain instructions for

future reference.

Self-Priming Portable

Utility Pump

General Safety

Information

motor to be exposed to water. Personal

injury and/or death could result.

Do not use to pump flam-

mable or explosive fluids

such as gasoline, fuel oil,

kerosene, etc. Do not use in

a flammable and/or explosive atmos-

phere. Pump should only be used to

pump clear water. Personal injury and/or

death could result.

must be performed by a qualified electri-

cian.

Do not walk on wet areas

until all power is turned

off. Failure to follow this

warning could result in

fatal electrical shock.

1. Read all instructions before

operation.

2. Disconnect power and release all

pressure within the system before

servicing any component.

3. Drain all liquids from system before

servicing.

starting the pump. An unsecured dis-

For parts, product & service information

visit www.blueangelpumps.com

charge line may whip. Personal injury

and/or property damage could result.

4. Periodically inspect pump and sys-

Do not submerge

motor or allow

5. Provide a means of pressure relief

6. Protect electrical cord from sharp

Installation

Risk of electrical

shock. All wiring

Always disconnect power

source before attempting

to install, service, or main-

tain the pump. Never han-

dle a pump with wet hands or when

standing on wet or damp surface or in

water. Fatal electrical shock could occur.

1. A ground fault circuit interrupter

Risk of fatal electrical

shock! This pump is sup-

plied with a grounding

conductor and grounding

type attachment plug. A grounded

Secure the dis-

receptacle in conformance with current

charge line before

NEC and local codes must be used (See

Figure 1).

tem components, checking for

weak and/or worn hoses. Insure all

connections are secure.

in the case of an obstructed dis-

charge line.

objects, hot surfaces, oil and chemi-

cals. Avoid kinking the cord and

replace damaged cords immediately.

(GFCI) is required.

321304-002 1/07

EC50