Blue Angel BCPA10 Schnellstart-Anleitung
Blättern Sie online oder laden Sie pdf Schnellstart-Anleitung für Messgeräte Blue Angel BCPA10 herunter. Blue Angel BCPA10 13 Seiten. Advanced text notification
Seite druckenREAD THIS MANUAL BEFORE USING THIS PRODUCT.
FAILURE TO FOLLOW THE INSTRUCTIONS AND
SAFETY PRECAUTIONS IN THIS MANUAL CAN
RESULT IN SERIOUS INJURY OR DEATH. KEEP THIS
MANUAL FOR FUTURE REFERENCE.
QUICK START INSTRUCTIONS
DESCRIPTION
Thank you for your purchase. This
device includes a dual float sensor that
installs in your sump pit, a control unit
that attaches to the discharge pipe
above the pit, and a power cord. When
the device detects a power outage
or high water condition, a LED light
flashes, an audible alarm sounds, and
the device will send a text message
alert to (up to) three mobile phone
numbers that you have programmed.
This device operates on AC power
and requires four (4) AAA batteries (not
included). There is a small monthly fee
for the texting service.
STEP 1 - VERIFY PACKAGE
2
1
The Professional's Line
PUSH TO TEST
Advanced Text
Notification
1. Advanced Text Notification
Cellular Device
2. Dual float water sensor with
hose clamp
3. Four (4) mounting straps
4. A/C power adapter
INSTALLATION TOOLS NEEDED
1. Safety glasses
2. Phillips head screwdriver
3. Flat head screwdriver
4. Scissors or wire snips
5. Four (4) AAA Batteries
STEP 2
a. SIGNAL STRENGTH
b. INSTALL BATTERIES
c. NETWORK CONNECTION
For detailed instructions go to page 3.
STEP 3 - ONLINE ACTIVATION
For detailed instructions go to page 4.
© 2013, Blue Angel
Pumps, Harrison Ohio.
Advanced Text Notification
Unit ID and Promo Code:
CONTENTS
3
For detailed instructions go to page 4.
4
For detailed instructions go to page
4. Record device phone number (from
activation email) below:
For detailed instructions go to page 4.
Record your (3) emergency contact
cell phone numbers (with texting
capability) you enter into the device.
Phone1
Phone2
Phone3
For detailed instructions go to page 5.
For parts, product & service information
www.blueangelpumps.com/AdvancedText
QUICK START INSTRUCTIONS
Figure A
(mfr puts sticker here)
CONFIRMATION
STEP 5 - SAVE DEVICE
NUMBER AS A CONTACT
STEP 6 - INSTALLATION
STEP 7 - ENTER EMERGENCY
STEP 8 -TEST DEVICE
BCPA10
Unit ID
STEP 4 - EMAIL
CONTACTS
354200-002 6/13