DNF Controls 4000CL-O Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller DNF Controls 4000CL-O herunter. DNF Controls 4000CL-O 19 Seiten. 400 video clip fast access system with odetics protocol

Seite drucken

Reference . . .

14. SETUP MENU

Press [MENU]. The MENU indicator will turn on.
Turn the Wheel to select item to change.
Press [MENU] OR use the Softkeys to change the desired mode for that option.
Turn the Wheel at anytime to select another item.
Press [ESC] at anytime to exit SETUP MENU. The MENU indicator will turn off.
MENU MODES
RECORD
Press Softkey to select the desired record mode:
Assemble, Insert, Lockout or Crash (Full).
WIND
Press Softkey to select:
MODE
HOLD (fast wind is maintained only while key is depressed).
OR
LATCH (fast wind is initiated and maintained with momentary key press).
Select fast wind speed (03.9X, etc.) by pressing Softkey.
SLOMO
ST300 display shows
(Non T-Bar version):
ST300 display shows
(
T
-
(
T
-
Press Softkey [TBAR] (or [WHEEL]) to toggle between T-BAR and WHEEL.
NOTE - The T-BAR has a fixed speed range of 0 +200 with a detent at +100% play speed.
For Wheel only:
Press Softkey [SPDRANGE] to select SLOMO speed ranges:
Press Softkey to select 0
Press Softkey [BACK] to return to SLOMO MENU.
Press [ESC] to exit SETUP MENU
OR turn the Wheel to select another item.
(Continued on next page.)
13
4000CL-O, 400 Clip Fast Access System, Odetics Protocol
B
a
r
v
e
r
s
i
o
n
)
:
B
a
r
v
e
r
s
i
o
n
)
:
+200 OR –100
(Turning Wheel Clockwise)
SLOMO with:
SpdRange
SLOMO with:
Wheel
SpdRange
+200.
WHEEL
Preset
TBAR
Preset