Do-Right Solar SWS-200 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Inverter Do-Right Solar SWS-200 herunter. Do-Right Solar SWS-200 19 Seiten.

How it works

The SWS-200 solar water still is of a "wick" design, meaning that it works by

having the input source water slowly and continuously wet a black cloth wick. The

sun shines through the front glass pane and heats up the wick, to the point where

water evaporates from it and rises up to the pane where it condenses. The

condensed distilled water runs down the glass pane into a trough where it then runs

out of the still and into a carboy.

Water is fed into the still by way of 1/4" tubing coming from a hose faucet. The

water pressure in this line is set to 10 psi by a regulator located at the faucet. The

flow rate of water is set by the main valve of the still. Water is evenly distributed

on the wick by a manifold inside the still, this manifold being 1/4" tubing with a

series of small pin holes.

After exiting the still and before entering the carboy, the distilled water passes

through a granular activated carbon (GAC) post-filter, in order to remove any

residual organic volatiles. The water finally entering the carboy is highly purified

and ready for drinking as is, or may be remineralized if desired.