DOBE DB400 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt DOBE DB400 herunter. DOBE DB400 9 Seiten. Dog training bark collar

Seite drucken

HOW TO CHOOSE ONE OF ANTI BARK MODE

When you press

button, you will hear one beep from the collar,

which means the beep mode is selected and ready to use.

Mode:

1.5S

The collar just beep on the 1st time and 2nd time as a initial warning

on your dog barks. When your dog barks the 3rd time, it will add in

Shock, the shock intensity is the level 100.

However, if the dog stops barking for 30 s e c o n d s , t h e b e e p i n g

duration will be automatically reset to the initial.

When you press

button, you will hear two beeps from the collar,

which means the vibrate mode is selected and ready to use.

Mode:

1.5S

The collar just beep on the 1st time as a warning on your dog barks.

When your dog barks the 2nd time and 3rd time, it will add in Vibrate.

in the 4th time, it will add in Shock, the shock intensity is level 100.

However, if the dog stops barking for 30 s e c o n d s , t h e b e e p i n g

duration will be automatically reset to the initial.

When you press

button, you will hear 3rd beeps from the collar,

which means the shock mode is selected and ready to use.

1.5S

Mode:

1.5S

The collar just beep on the 1st time as a warning on your dog barks.

When your dog barks the 2nd time to 5th time, it will add in Shock,

based on your settings.

1.5S

However, if the dog stops barking for 30 seconds, the duration will

be automatically reset to the initial.

NOTE: if the continued stimulus reaches the 5 times, then the collar

will stop working for 30 seconds to protect the dog even he still barks.

the LED light will flashing 30 seconds at the same time.

HOW TO SET THE SENSITIVITY LEVEL FOR ANTI BARK MODE

Pressing and hold the button for 0.5 seconds every time to set the

sensitivity level. do not hold it over 3 seconds, the collar will into the

pairing status and you can't pairing the collar in Channel A position.

When you hear 1 beep from the collar,

you set to the level 1.

When you hear 2 beeps from the collar,

you set to the level 2.

When you hear 3 beeps from the collar,

you set to the level 3.

When you hear 4 beeps from the collar,

you set to the level 4.

When you hear a long beep from the collar, you set to the level 5.

NOTE: Level 5 is highest sensitive and easy to work when the dog

barks, sometimes you need to adjust to the lower level to fit your dog.

HOW TO TESTING THE ANTI BARK MODE

Please make sure the Metal Probes Contact Points is touch your

dog's neck skin both. We have used a new technology to identify the

barks from your dog by vibration and trigger the collar work to avoid

false trigger caused by other dog barks around your dog.

So if your dog's bark isn't causing a vibration against the sensor it

doesn't work.

We would recommend faux sounds to provoke the behavior before

actually using the product to correct it automatically.