3M Speedglas 9100 Handbuch

Blättern Sie online oder laden Sie pdf Handbuch für Projektor 3M Speedglas 9100 herunter. 3M Speedglas 9100 3 Seiten. Welding helmet and hardhat adapter for use with xlr8 hardhat, and other alternate hardhat configurations
Auch für 3M Speedglas 9100: Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten)

Seite drucken

Speedglas

9100 – Welding Helmet and Hardhat Adapter for

™

use with 3M

XLR8 Hardhat, and Other Alternate Hardhat

™

Configurations

** Refer to 3M™ Speedglas™ 9100 Welding Helmet, 3M™ XLR8 Hardhat, or Listed Alternate Hardhat

Complete User's Instructions for List of Product Warnings and Proper Use

Ensemble masque pour soudeurs et adaptateur de casque

dur 9100 Speedglas

à utiliser avec le casque dur XLR8 3M

™

et d'autres configurations de casque dur

** Consulter les directives d'utilisation complètes du masque pour soudeurs 9100 Speedglas™, du

casque dur XLR8 3M™ et des autres casques durs indiqués pour connaître les mises en garde et les

directives d'utilisation adéquates du produit.

Speedglas

9100 – Careta para soldadura y Adaptador de

™

casco para uso con Casco 3M

alternativas de Casco

**Remítase a las Instrucciones de Careta para soldadura 3M™ Speedglas™ 9100, Casco 3M™ XLR8

o Casco alternativo listado para consultar la lista de advertencias y uso adecuado del producto.

3M Occupational Health and

Environmental Safety Division

3M Center, Building 0235-02-W-70

St. Paul, MN 55144-1000

Printed in U.S.A.

3M and Speedglas are trademarks of the 3M Company.

Fibre-Metal is a registered trademark of Honeywell.

V-Gard® and Thermalgard® are registered trademarks of Mine Safety Appliances Co. – MSA.

Jackson Safety is a registered trademark of Kimberly Clark.

3M Occupational Health

and Environmental Safety Division

3M Canada Company

P.O. Box 5757 London, Ontario N6A 4T1

Printed in U.S.A.

3M and Speedglas are trademarks of the 3M Company, used under license in Canada

Fibre-Metal is a registered trademark of Honeywell.

V-Gard® and Thermalgard® are registered trademarks of Mine Safety Appliances Co. – MSA.

Jackson Safety is a registered trademark of Kimberly Clark.

Division des produits d'hygiène

industrielle et de sécurité

environnementale de 3M

Compagnie 3M Canada

C.P. 5757

London (Ontario) N6A 4T1

Imprimé au Canada.

3M et Speedglas sont des marques de commerce de 3M, utilisées sous licence au Canada.

Fibre-Metal est une marque déposée de Honeywell.

V-Gard et Thermalgard sont des marques déposées de Mine Safety Appliances Co. – MSA.

Jackson Safety est une marque déposée de Kimberly Clark.

3M México S.A. de C.V.

Av. Santa Fe No. 190

Col. Santa Fe, Del. Álvaro Obregón

México D.F. 01210

Impreso en EUA.

3M y Speedglas son marcas registradas de 3M Company.

Fibre-Metal es una marca registrada Honeywell.

V-Gard® y Thermalgard® son marcas registradas de Mine Safety Appliances Co. – MSA.

Jackson Safety es una marca registrada de Kimberly Clark.

XLR8 y otras configuraciones

™

34-8704-7239-5

• This is an addendum to the User Instructions for the 3M™ Speedglas™ 9100 Auto-Darkening Welding

Helmets. Always read and follow the User Instructions provided with each individual component of any

welding helmet or hard hat assembly. User Instructions include important warnings and use limitations.

Failure to do so may result in sickness or death.

• Do not use any welding product without appropriate training. For proper use, see supervisor or User

Instructions or call 3M in U.S.A. 1-800-243-4630. In Canada, call 1-800-267-4414. Failure to do so

may result in sickness or death.

• Always wear ANSI Z87.1-2003 compliant safety spectacles in addition to any welding helmet. Failure

to do so may result in permanent eye injury and vision loss. In Canada, follow CSA Z94.3 and/or the

™

requirements of the authority having jurisdiction in your region.

Introduction

Two ANSI standards cover performance requirements for welding shields combined with hard hats: Z87.1-

2003 Eye and Face Protection Devices and Z89.1-2003 Industrial Head Protection. Both standards require

welding helmets and hard hats to be tested as a complete assembly, as they would be worn by a welder.

Assembling a welding hard hat using components from different manufacturers or brands voids ANSI

compliance unless tests verify that the assemblies remain compliant with the ANSI requirements.

These User Instructions cover the 3M™ Speedglas™ 9100 welding helmet models listed in Table 1, mounted

to certain hard hats that have been independently tested for compliance with the above referenced ANSI

standards. In all cases, the 3M™ Speedglas™ 9100 Hardhat Adapter for 3M™ Speedglas™ 9100 helmets

(part number 06-0014-00NR) was used as the mounting device.

IMPORTANT: To maintain ANSI compliance, use only the exact components listed in these User Instructions.

Specifications

− Eye and Face Impact: ANSI Z87.1-2003 high impact protector (Z87+)

− Head Impact: ANSI Z89.1-2003, Type I (top impact). Refer to hard hat literature for electrical rating.

Table 1. 3M™ Speedglas™ Welding Helmet Options

Speedglas™ Helmet Model

Description

06-0100-10

9100, ADF 9100V, Shades 5,8-13

06-0100-10SW

9100 with Sidewindows, ADF 9100V, Shades 5,8-13

06-0100-20

9100, ADF 9100X, Shades 5,8-13

06-0100-20SW

9100 with Sidewindows, ADF 9100X, Shades 5,8-13

06-0100-30

9100, ADF 9100XX, Shades 5,8-13

06-0100-30SW

9100 with Sidewindows, ADF 9100XX, Shades 5,8-13

Hard Hat Options

The configurations that were tested and passed the above referenced ANSI impact test requirements are

summarized in Table 2. Use with hardhats other than those listed in Table 2 have not been tested as complete

assemblies and would void compliance with the above reference ANSI standards. These User Instructions do

not cover 3M™ Speedglas™ ProTop or other 3M™ Speedglas™ systems sold complete with hard hats.

Manufacturer

Hard Hat Model

XLR8 with 6 Point Ratchet

MSA

V-Gard® w/Fas-trac Suspension

MSA

Thermalgard® w/Fas-trac Suspension

Fibre-Metal®

E2 w/Ratchet Suspension

Bullard®

Classic Series w/6pt. Ratchet Suspension

Bullard®

S61 w/ Flexgear

Jackson Safety®

SC6 w/ Ratchet Suspension 391

Assembly Instructions

1. Follow Figs. 1-7, to properly remove and replace the 3M™ Speedglas™ headgear with the 3M™

Speedglas™ 9100 Hardhat Adapter as shown in Figs. 1 thru 4.

2. Assure to re-configure the head suspension in the hardhat to face the brim backwards as is shown in Fig. 5.

3. Attach the 3M™ Speedglas™ 9100 assembly to the hardhat as shown in Fig. 6 and adjust the Hardhat

Adapter "pin lock" for a tight fit around the hardhat as shown in Fig. 7 for a completed assembly.

FOR MORE INFORMATION

In United States, contact:

Website: www.3M.com/OccSafety

Technical Assistance: 1-800-243-4630

For other 3M products:

1-800-3M-HELPS or 1-651-737-6501

Fig. 1

Fig. 4

WARNING

Table 2. Hard Hat Options

Hard Hat Part No.

45995-00001

475358 thru 475365 & 488146

486959 thru 486963, 487677,

800360, 814343, 10095325

E2 with 3-RW2 suspension

C30R

S61R

3001987 thru 3001996

Fig. 2

Fig. 6 a-c

Fig. 3

Fig. 5

Fig. 7