docherty SEVERN CORNER Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Innenkamin docherty SEVERN CORNER herunter. docherty SEVERN CORNER 14 Seiten.

During heating all handles and knobs must be operated using a pair of tongs, hook or by a

hand protected by a glove due to the risk of burns. Objects made from flammable materials

that could be set on fire must not be stored on the fireplace stoves during operation and

while hot.

Please pay special attention when handling the ashpan and when removing hot ash due

to danger of burns! The hot ash must not get in contact with flammable objects -e.g. when

throwing in communal waste containers.

When the fireplace stove is used only seasonally and with unfavourable draught or weather

conditions, special attention must be paid when putting the stove into operation. When the

fireplace stove is not in operation for a longer period of time, the flueways must be checked

for obstructions before further operation.

Handling

Adequate facilities must be available for loading, unloading and site handling. This appliance

is heavy and must be handled with care.

Fire Cement

Some types of fire cement are caustic and should not be allowed to come into contact with

the skin. In case of contact wash immediately with plenty of water.

Asbestos

This stove contains no asbestos. If there is a possibility of disturbing any asbestos in the

course of installation then please seek specialist guidance and use appropriate protective

equipment.

Metal Parts

When installing or servicing this stove care should be taken to avoid the possibility of personal

injury.

3.1 Safe distance:

3.1.1 Safe distance of fireplace inserts from flammable materials

400mm to sides

400mm to rear

800mm in front of the centre point of door assembly

Note:These distances double if material is easily flammable example, fibreboards,

polystyrene, polyurethane

Any storage area built into the appliance must not be used to store any combustible materials.

The installation must comply with current Building Regulations, National and European

Standards, Local Authority byelaws and other specifications or regulations as they affect the

installation of the stove. The most stringent clearances to combustibles should be applied.

3.1.2 Safe distance of chimneys from flammable materials and building constructions

When constructing an enclosure (such as Silca 250) to protect the structure and fabric of the

building. It should be used to protect any adjacent walls and ceilings where fire protection

is required please follow manufacturers installation instructions for protective board being

used.

It is also important that the correct levels of ventilation are installed as to ensure that no

surfaces of the installation or adjacent surfaces (including walls and ceilings) reaching a

temperature above 85 deg C.

Minimal distances:

A = 80cm

B = 40cm