Docking Drawer Trio Einbauanleitung

Blättern Sie online oder laden Sie pdf Einbauanleitung für Schalter Docking Drawer Trio herunter. Docking Drawer Trio 2 Seiten.

Seite drucken

Docking Drawer Trio™

Installation Instructions

DOCKING DRAWER

TRIO PART #:

3030-xxx0

3040-xxx0

DOCKING DRAWER

TRIO PART #:

3050-xxx0

Time Required - 30 min

Tools Needed:

• Screwdriver

• Jigsaw

• Square

• Drill

• Pencil

• Measuring Tape

• Cutout Template

Downloadable Resources

For additional planning resources, visit

dockingdrawer.com/downloads

• Spec Book

• DXF and STEP Files

• Mounting Diagrams

• Electrical Certifications

CAUTION – READ CAREFULLY

• Failure to follow these instructions can cause

death or permanent injury. Do not work on

live electrical circuits! Make absolutely certain

power is off before connecting the device!

• This product is for dry, indoor and permanent

installations only.

• Install the device in accordance with all

national and local electrical codes.

How to Install the Outlet

There are 3 methods to install the Trio Series

depending on your drawer box type. The

following instructions detail the installation

process for Shallow drawer box types. Need

more detail for the other options? Call us at

+1 (925) 233-5598.

Step 1 -

Verify there is space available for the

in-drawer outlet behind the drawer box. The

Docking Drawer Trio requires at least 51mm

of space behind the drawer box and 381mm

minimum drawer box width.

DOCKING DRAWER TRIO

Step 2 -

Remove the included cutout

template.

Step 3 -

Locate the proper location for

the receptacle box cutout using our cutout

template. You can locate the proper location

from either the inside or backside of the

drawer box, making sure that the arms will

not interfere with the slides and that there is

enough material surrounding the receptacle

box to securely hold it in place.

Step 3 - cont.

for Docking

Drawer Trio

Step 4 -

With a 13mm drill bit, drill a hole in

each corner, being careful not to splinter the

wood on the inside of the drawer box. Using

one of the 13mm holes, insert a jigsaw and then

make the required cutouts in the drawer box.

Step 5 -

Reinstall the drawer box and slide

the Docking Drawer Trio receptacle box

through the cutout. Secure it with the 4 wood

screws provided.