Fleetrite FLTAMFMRCD Betriebsanleitung für Benutzer - Seite 8

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Benutzer für Auto-Empfänger Fleetrite FLTAMFMRCD herunter. Fleetrite FLTAMFMRCD 13 Seiten.

Seite drucken
Controls
1. POWER ON/OFF
Push the button (5) to turn on the unit. Push the button again to turn off the unit.
2. SELECT Button (2)
1) Audio control (VOLUME / BASS / TREBLE / BALANCE / FADER )
Press key quickly to select the following features;
"VOL" display - volume control > press key (2)>
"BAS" display - bass tone control >press key (2)>
"TRB" display - treble tone control > press key (2)>
"BAL" display - balance control > press key (2)>
"FAD" display - fader control > press key (2)>
If the key or one of the keys is not pressed within 5 seconds, the radio automatically switches into volume level control
mode. These settings are indicated on the display window.
VOLUME --> Select --> BASS --> Select --> TREBLE --> Select --> BALANCE --> Select --> FADER
2) Beep 2nd, I-Vol, Area Selection
When the button is pressed over 2 seconds, the unit will be operated as below:
ND
BEEP 2
--> Select --> I-VOL --> Select --> AREA
a. Beep 2nd
On the beep 2nd, you can control the beep on or beep 2nd by turning the spindle knob.
- Beep on : You can hear "beep" sound when you press all buttons.
- Beep 2nd :You can hear "beep" sound when you press the button over 1.5 secs.
b. I-Vol
By pressing the button again, the unit will be into the I- VOL mode. (Initial Volume Level Adjustment). You can adjust
the I-Vol of what you want to set by turning the spindle knob and the I-Vol will be set automatically. After the setting of
initial levels, when the unit is power on/off, detach on/off, and ACC on/off, the I-VOL will keep the volume adjusted to
the preset level when unit is turned on.
c. Area Selection
By pressing SEL button again, the unit will be in Area Selection mode. Use the spindle knob to choose USA or EUR