ETA Systems ETA-ECS3 Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Aufnahmegeräte ETA Systems ETA-ECS3 herunter. ETA Systems ETA-ECS3 16 Seiten. Power sequencer & conditioner
Seite druckenWARNING – WHEN THE DEVICE IS IN USE
• To prevent electric shock, do not remove the product cover as there are high voltage components inside. Refer all servicing to
ETA Systems.
• Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the
AC outlet and contact ETA Systems. Do not to attempt to continue operation with the product as this may cause fire or electric shock:
•
Smoke or strange smell coming from the unit.
•
If the product falls or the case is damaged.
•
If water or any metallic objects falls into the product.
• If the power supply cord is damaged in any way.
•
If the unit is malfunctioning.
•
Do not insert or drop metallic objects or flammable materials into the ventilation holes of the product's cover, as this may result in
electric shock or fire.
•
Do not place any containers with liquid or metallic objects on the top of the product. If any liquid spills into the unit, fire or electric
shock may result.
•
Never operate this product or touch the power supply cord during an electrical storm, electric shock may result.
•
Never exceed the power rating on the product when connecting equipment. Fire and/or property damage may result.
•
Operate the product only with the voltage specified on the unit. Fire and/or electric shock may result if a higher voltage is used.
•
Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not place heavy objects
on the power cord, including the product itself, doing so may result in fire or electrical shock.
•
Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe as a catastrophic
disaster may result.
•
Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property damage.
CAUTION – WHEN INSTALLING THE PRODUCT
• Installation of this product must be done by a certified electrician for a permanently connected apparatus provided neither with an
all-pole mains switch nor an all-pole circuit breaker. A readily accessible disconnect device shall be incorporated in the building
installation power wiring. The installation shall be carried out in accordance with all applicable installation rules in accordance with all
applicable federal, state, and local laws, regulations, and safety codes and ordinances.
•
Never install this product in humid or dusty locations, nor in direct sunlight, near sources of heat, or in areas where sooty smoke or
steam are present. Fire and electric shock may result.
•
Keep all sides of the unit at least 3
CAUTION – WHEN THE DEVICE IS IN USE
•
Never place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and property damage. In
addition, the product itself may fall and cause injury and property damage.
•
Contact ETA Systems for instructions on cleaning the inside of the unit. Large accumulations of dust inside the unit may result in heat
buildup and fire.
•
Ensure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate on the power plug or
inside the wall outlet.
•
When cleaning the unit or the unit is not to be operated for an extended period, unplug the power cord from the wall.
ETA-ECS3
Power Sequencer & Conditioner
⁄
" away from objects that may obstruct air flow to prevent the unit's internal temperature rise.
1
2
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
– 4 –
Specifications are subject to change without notice.
ETAsys.com