Fleetworks FLTW-7634 Einbauanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Einbauanleitung für Rückfahrkamera Fleetworks FLTW-7634 herunter. Fleetworks FLTW-7634 5 Seiten. 2009 - 2012 ram truck rear vision parkline camera with rca and factory display harnesse
Seite druckenFigure 7
21.
Recommended: Apply a corrosion inhibitor to the
Chassis Harness pass through hole. (Figure 8)
Figure 8
22.
Insert RCA connector end of supplied Chassis
Harness through cab floor into cab.
(Recommended: Silicon or Grommet to seal off
hole.)
Connect & Secure Chassis Harness
23. Plug the RCA connector end of the supplied Chassis
Harness into Video In your display.
24. Route supplied Chassis Harness along existing
chassis harness toward rear of vehicle, staying clear
of body mounts. (Figure 12)
Figure 12
25. Connect supplied Chassis Harness to Tailgate Handle
Camera harness. Use supplied glued heat shrink
tube over RCA and Power connector to create seal
between chassis and camera harness. (Figure 13)
Figure 13
Connect Chassis Harness to Vehicle Wiring
26. Connect the supplied Chassis Harness Red and Black
leads as directed in the chart appropriate for your
vehicle below.
Chart A:
Aftermarket display / Factory NAV
Color
Polarity
Function
Red
(+)
Ignition
Black
(–)
Ground
Location
Splice to
pink/green wire in
Instrument Panel
connector pin 16
(Figure 1)
Chassis ground
(Figure 2)
Figure 1