FLEMING ST1300N Handbuch - Seite 8
Blättern Sie online oder laden Sie pdf Handbuch für Nutzfahrzeug FLEMING ST1300N herunter. FLEMING ST1300N 11 Seiten. Slurry tankers
Seite drucken1.6 SLURRY TANKER OPERATION
Filling Procedure.
Read the sections in this manual regarding safety and maintenance.
Attach the suction filling hose to the quick attach fitting located at the rear of
the tanker.
Open the manual rear fill inlet valve with the operating handle.
Ensure that the end of the fill pipe is completely submerged before opera-
tion.
Ensure the vacuum pump oil drip feed is set to 1 drop every 3 seconds
Set the vacuum pump operating lever in the Suction position.
Engage the PTO at low rpm and increase to 350 rpm.
When slurry appears in the sight glass at the rear of the tanker, shut the in-
let valve with the operating handle.
Move the vacuum pump operating lever to the Neutral position.
Remove the suction fill pipe.
Spreading Procedure.
On arrival at the spreading site set the pump operating lever to the Pres-
sure position.
Engage the PTO at approximately 350 rpm while driving forward. Using the
hydraulic control, open the gate valve to the discharge unit at the rear of the
tanker.
TYRE PRESSURES
Tyre
550/65-22.5
28.1 R26
RECOMMENDED LUBRICANTS
GREASE
Manufacturer
Recommended
Shell
Shell Retinax LX2
Mobil
Mobil Grease H.P .222
Castrol
Castrol LMX
Texaco
Hytex EP2
Esso
Unirex EP2
BP
Energrease LC2
OIL
Manufacturer
Application
BATTIONI
Vacuum Pump oil
PAGANI POMPE
reservoir
Any of the
Vacuum Pump
above
gearbox
Brake Adjustment
It is highly recommended that brake adjustment is only carried out by
qualified service engineers.
For the safe operation of the tanker it is imperative that a routine mainte-
nance schedule is developed for cleaning, inspection, adjustment and
lubrication of brake components.
Adjustment of brakes should be carried out as frequently as required to
maintain safe operation. When resetting brakes. The hydraulic brake ram
should be 38mm – 50mm from the end of its stroke when the brake shoes
engage the hub.
At regular intervals remove the brake drums and check linings for wear and
the drums for cracks, scoring or any other form of deteriation.
BAR
PSI
2
29
2
29
Alternative
Shell Retinax LX
Mobil Grease H.P.
Spheerol A.P.T.Z.
Recommended
Alternative
Vacuum Pump Oil
SAE20 (SAE30
VPO005BP
in summer)
EP90 Hypoid