DOD FS580+ Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Dash Cameras DOD FS580+ herunter. DOD FS580+ 15 Seiten.

Connected Power

Before connecting the power,

lens USB cable installation is complete,

to the car to reduce the host and rear lens damage chance.

NOTE:

Please use the original car charger to avoid damage caused by

non-compliance with the specifications.

If there is oil, fingerprints or other dirt on the inside or outside of

the windshield, wipe it clean before installing it.

When using the bracket, please choose the position carefully. Do

not place the main unit in a position that will obstruct the view

of driving or affect the normal operation of the airbag.

Road conditions vary from country to country, so it is

recommended to set the gravity sensor to "low" to avoid

frequent gear locking.

Turn on and off

The machine will automatically turn on and start recording when the vehicle is

started, and will automatically turn off when the vehicle is turned off and the

power is cut.

NOTE:

For certain models, the power will not be cut off immediately

when the vehicle is turned off. This situation may cause the

machine to continue to consume power, which may lead to the

depletion of the vehicle battery.

Constant Power

If your vehicle recorder is connected to a constant power source, simply

unplug the USB power source after the engine is turned off to turn it off.

Watch the video

The video will be stored on a memory card, which can be watched in playback

mode by the camera or by inserting the card into a computer.

The files on the card will be categorized as follows:

Loop recording clip: The length of the video varies depending on user

settings.

Video folder is VIDEO

Lock the file folder to EMERGENCY

Example.

Previous video file name: 20220601192757_000001A

Post-camera video file name: 20220601192757_000001B

*The string represents the date and time the video was shot (in the order of

year, month, day and 24 hours)

please be sure to first connect the host and rear

finally connect the car charging power