Clinton Electronics CE-M32A-PIR Handbuch zur Grundeinstellung - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch zur Grundeinstellung für Digitalkamera Clinton Electronics CE-M32A-PIR herunter. Clinton Electronics CE-M32A-PIR 9 Seiten. Pvms w/ axis m3065
Auch für Clinton Electronics CE-M32A-PIR: Handbuch zur Grundeinstellung (7 seiten)
Seite drucken
DISPLAY – Image Modes
Press the 'MENU' button on the included remote or the buttons located on the back of the PVM to adjust menu
settings. Navigate up/down through the menu, press Enter to select an option and left/right to make adjustments.
Press the Exit button to escape from a menu option and to exit the OSD menu.
Camera:
Only the camera image is shown on the
screen of the PVM, no switching occurs.
SD Video:
Only content (images or video) from the
SD Card player is shown on the screen, no switching
occurs.
SD CARD
Basic Setup Guide: "A-Series" PVMs w/ AXIS 3065 Camera
11.21.22
Display
Aspect Ratio
Image Mode
Motion Dwell Time
Camera
HDMI:
screen of the PVM, no switching occurs.
Motion:
SD Card will be shown on the screen, when motion is
detected by the PIR sensor the screen will switch to
the camera image.
2
:
Full Screen
:
Motion
:
5
Sec.
1920x1080@30Hz
Only a connected HDMI input is shown on the
When no motion is detected content from the
SD CARD
Information in this document is subject to change without notice.