Etac N10200 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hebesysteme Etac N10200 herunter. Etac N10200 19 Seiten.

Seite drucken

Molift Smart 150 | BM09299 Rev C | www.etac.com

Safety devices

Molift Smart 150 is equipped with several safety

devices, which are intended to prevent damage to

personnel and equipment in the case of incorrect

use.

The hoist has an overload sensor preventing the

hoist to be operated if the load exceeds SWL.

The lifting arm is hinged to prevent the arm

and sling bar from squeezing the user. The

actuator will not produce any force when moving

downwards.

The legs are folded together during transport to

make the hoist as small as possible. When assem-

bling the hoist, the legs must be opened to work-

ing position. The lifting column will not fix into

the bracket if the legs are not adjusted beyond

transport position - a safety feature ensures this.

The electronics are disabled if overheated. Wait

until the hoist has cooled down before using it

again.

Push / Pull handles

Use the pull handles to move the hoist.

Do not push or pull the user,

lifting arm or actuator.

This may cause instability and

hoist may tip over.

The hoist shall only be used for movement

over short distances. It is not a replacement

for wheelchair or similar.

Brakes

Rear castors are equipped with brakes. Step on

pedal to lock brakes. Flip up to unlock.

Emergency Stop / Emergency lowering

Emergency stop

The emergency stop shuts off the power when

pushed in. Turn clockwise to reset (OK to operate

when the green ring is visible).

Electrical emergency lowering

Push and hold button for electrical emergency

lowering to lower lifting arm. The electrical emer-

gency lowering function does not work when the

emergency stop is activated.

Manual emergency lowering

Pull handle on the actuator upwards to start

emergency lowering, and the lifting arm moves

downwards when loaded. The lowering will

increase in speed the higher the handle is pulled.

Release the handle gently. Releasing the handle

too quickly may cause person injury or damage to

the hoist.

The manual emergency lowering function on the

actuator should only be used when the electrical

emergency lowering does not work.

Manual

Emergency

lowering

Electrical

Emergency

lowering

Emergency

stop