1010 Music Bitbox Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte 1010 Music Bitbox herunter. 1010 Music Bitbox 11 Seiten.
Auch für 1010 Music Bitbox: Schnellstart-Handbuch (2 seiten)

Seite drucken

The MicroSD Card

Bitbox uses a MicroSD card to store clips and clip parameter information. A MicroSD card must be inserted into

the MicroSD slot on the front panel of the bitbox during operation of the module. A MicroSD card loaded with

some sample clips is included with bitbox. Insert the MicroSD card with the notched edge down.

Working with Clips

When you first start bitbox, you will see the Main screen. Each

square or cell represents a clip that can be played back. Clips can

be loaded from the MicroSD Card or recorded from inputs. The

MicroSD card provided with the module has several Preset banks of

clips to get you started.

The pink square indicates which cell is selected. You can change the

selection two ways: by touching the cell or by turning any of the

Control Knobs.

Playing a Clip

There are three ways to trigger playback of a clip:

1. Touch a cell to play the corresponding clip. The light grey colored cells in the grid hold clips. The name of

the clip appears in the cell after it is loaded. Blank cells are empty.

2. Plug a trigger source into one of the CV Trigger jacks. The CV Trigger jacks are mapped to the clip cells

on the touchscreen. The clip that corresponds to the used CV Trigger jack will now be triggered by the

CV Trigger input.

3. Plug a MIDI controller source into the MIDI input jack.

Note:

The MIDI input uses a TRS connection compatible with the Arturia BeatStep Pro. Be sure to use a

•

TRS cable.

Bitbox responds to MIDI inputs on MIDI Channel 10, which is the default channel

•

for the drum part on the BeatStep Pro.

MIDI inputs for notes 36 to 51 are mapped to the clips in the grid as shown in the

•

diagram to the right. The modulators are assigned notes 52 to 55.

Clip Information

To adjust the selected clip's parameters, press the INFO button. Cells

with text in them already have a clip loaded. When you press INFO

with a loaded cell selected, you will see the

shown to the right.

P. 3

v. 1.0

Clip Info

screen

Bitbox User Manual