3M 6300 Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Produkt für die Atemwege 3M 6300 herunter. 3M 6300 2 Seiten. Half facepiece respirator
Auch für 3M 6300: Gebrauchsanweisung (16 seiten), Technisches Datenblatt (3 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Gebrauchsanweisung (2 seiten)

Seite drucken

Step 3: Filter Assembly Connection to Facepiece

1. Align mark on back

side of 7093 filter with

facepiece mark in

order to properly align

filters.

Step 4: Donning Respirator & Adjusting Fit

1. Place the respirator

over your mouth and

nose and pull head

harness over the

crown of head.

Adjust the straps so the respirator is comfortable and snug, but do not overtighten.

Note: Decrease strap tension by pushing out on back side of buckles.

Note: Use of the EVF does not change donning steps.

If you have questions, consult your supervisor or call 3M Technical Service at 1-888-870-7416 (USA) or 1-800-267-4414

(Canada).

Notice: These respirators do not have the properties required of a surgical respirator, and so would not be appropriate for use in a surgical

setting.

Medical Solutions Division

3M Health Care

2510 Conway Ave.

St. Paul, MN 55144 USA

2. Rotate filter ¼ turn

clockwise until it is

firmly seated. Repeat

steps 1-2 for second

filter.

2. Connect the bottom

straps at the back of

the neck.

Step 5: Positive Pressure User Seal Check

Place the palm of your hand over the exhalation valve cover (if using the EVF

place the palm of your hand over the EVF opening) and exhale gently. If

facepiece bulges slightly and no air leaks are detected between your face and

the facepiece, a proper seal has been obtained. If faceseal air leakage is de-

tected, reposition respirator on your face and/or readjust tension of the elastic

straps to eliminate leakage. If you cannot achieve a proper seal, DO NOT

enter contaminated area.

Phone: 1-800-228-3957

Web: 3M.com/Medical

Facepiece with 7093

filters properly attached.

Note: Rotate filters

counterclockwise to

remove.

3. Adjust top straps by

pulling on ends of

straps.

other marks shown are marks and/or registered marks of

3M. Unauthorized use prohibited. GL_70-2011-7961-4

4. Adjust bottom straps

by pulling on ends of

straps.